Rack Armour 300mm is the entry-point in the Rack Armour family of upright protectors and is widely specified across UK warehousing, retail back-of-house, light industrial operations and commercial storage facilities where the dominant impact threat sits below the 300mm strike-height band. Often referred to as the Small variant, the 300mm size delivers focused protection at the most common low-level strike zone – the zone where powered pallet trucks, hand pallet trucks, low-level order pickers and other compact MHE first contact a racking upright. Although smaller than the larger Medium, Large, XL and XXL variants in the family, the 300mm Rack Armour delivers engineered impact absorption, easy clip-on installation and the same authentic polymer-shell construction as the rest of the range.
This guide is written for warehouse, logistics, facilities and operations managers specifying upright protection in environments where 300mm is the right answer. We cover what Rack Armour 300mm is, how it differs from larger variants, where it is best deployed, the colour finishes available, the installation process, the wider Rack Armour ecosystem at Hall-Fast Industrial Supplies, total cost of ownership considerations, and frequently asked questions.
Hall-Fast Industrial Supplies stocks Rack Armour 300mm Small in both Hi-Vis Yellow and Safety Yellow alongside the matching installation tooling. With a price promise guaranteeing the most competitive UK terms on every authentic Rack Armour purchase, the dedicated Rack Armour brand section at https://www.hall-fast.com/brands/rack-armour is the fastest route to a quotation or online order. Alternatively, contact the Hall-Fast team via https://www.hall-fast.com/contact for tailored advice on specification and quantity.
What Is Rack Armour 300mm?
Rack Armour 300mm is the Small variant within the Rack Armour family of clip-on, polymer-shell upright protectors for pallet racking. The 300mm dimension refers to the vertical protection height of the unit as installed at the base of an upright. From floor level to the top edge of the shell, the protector covers a 300mm zone encompassing the area where pedestrian pallet trucks, low-level order pickers and small electric stackers tend to make first contact during everyday operations.
Like every product in the Rack Armour line, the 300mm Small uses a high-performance engineering polymer that flexes under impact and recovers its shape afterwards. This controlled flex absorbs collision energy, dissipating it across the body of the shell rather than transferring it directly into the upright. The result is significantly reduced damage to the rack from low-level strikes, no concrete spalling around any anchor point because the protector is not floor-fixed, and a highly-visible coloured surface that helps operatives judge clearances.
The 300mm Small is the lightest, most compact unit in the range. It is ideal for operations where a larger protector would be over-specified, or where the budget needs to stretch across a high upright count without compromising the genuine Rack Armour impact-absorption capability.
Why Specify Rack Armour 300mm Specifically?
There are several scenarios where 300mm is the right choice rather than a taller Rack Armour variant. Understanding these scenarios helps procurement teams specify confidently and avoid both under- and over-specification.
Pedestrian and Low-Level MHE Operations
In facilities where the dominant material handling equipment is pedestrian operated – walk-behind powered pallet trucks, low-level order pickers, manual pallet trucks and similar – the strike height is concentrated in the lowest 300mm of the upright. The chassis bumpers, fork heels and protruding fork tips of these machines all sit within the 300mm Small protection zone, and a taller protector would not deliver proportionately more value.
High Upright Counts at Constrained Budgets
Some operations face the challenge of needing protection across a very large number of uprights – think long-aisle archive storage, high-density retail back-of-house, or self-storage style installations. The 300mm Small delivers a powerful unit-cost story that allows budget-constrained sites to extend authentic Rack Armour coverage further than they could with larger variants alone. Many sites use the 300mm Small as a baseline across the whole rack run and reserve larger variants for high-risk hotspots.
Beam-Level Storage with Limited Vertical Exposure
Where stock is loaded and unloaded predominantly at low beam levels, the strike exposure of the upright is limited to the lower portion. In these cases the 300mm Small provides full coverage of the relevant zone and avoids unnecessary protective material above the strike envelope.
Retail and Hybrid Customer-Facing Environments
Trade outlets, builders' merchants and warehouse-style retail spaces often have members of the public moving close to racking. The 300mm Small offers visible, professionally-finished protection at low level, complementing visible guarding without over-dominating the visual environment.
Rack Armour 300mm Technical Specification
The Rack Armour 300mm Small is engineered to the same quality and performance standards as the rest of the Rack Armour family. The product specification is designed to deliver dependable impact absorption, easy installation and long service life.
Material
The shell is moulded from a high-performance engineering polymer chosen for impact resilience, elastic memory and stability across normal warehouse operating temperatures. The material does not corrode, does not require painting, and tolerates standard cleaning regimes without surface degradation.
Coverage Height
The product delivers 300mm of vertical protection from floor level upwards. This dimension is fixed and applies to both Hi-Vis Yellow and Safety Yellow finishes – the colour choice does not affect any aspect of the impact-absorbing performance.
Compatible Uprights
The 300mm Small fits the most common upright widths used by major UK pallet racking manufacturers. The internal cavity flexes during installation to grip the upright without compromising the structural design of the rack. For non-standard or proprietary upright profiles, the Hall-Fast team can advise on fit and arrange sample units.
Installation Method
The 300mm Small clips onto the upright using the dedicated Rack Armour installation tool sized for Small to Medium variants. There is no welding, no drilling, no floor anchor and no curing time. A trained operative can install many units per hour without specialist support.
Colour Options
Hi-Vis Yellow and Safety Yellow finishes are available, allowing the product to be matched to existing warehouse colour-coding standards or specified for maximum visual contrast in low-light environments.
Hall-Fast Rack Armour Resources and Product Pages
Hall-Fast Industrial Supplies stocks the complete authentic Rack Armour range and provides a single point of purchase for every size, every colour and every installation accessory you may require. The links below take you directly to the individual product pages, where you can review specifications, request quantities and place orders for next-day despatch where stock allows.
Brand and Company Pages
· Rack Armour brand hub at Hall-Fast: https://www.hall-fast.com/brands/rack-armour
· About Hall-Fast Industrial Supplies: https://www.hall-fast.com/about
· View all brands stocked by Hall-Fast: https://www.hall-fast.com/brands
· Contact the Hall-Fast team: https://www.hall-fast.com/contact
Hi-Vis Yellow Rack Armour Products
· Rack Armour Small Upright Racking Protectors – Hi-Vis Yellow: https://www.hall-fast.com/brands/rack-armour/rack-armour-small-upright-racking-protectors-hi-vis-yellow
· Rack Armour Medium Upright Racking Protectors – Hi-Vis Yellow: https://www.hall-fast.com/brands/rack-armour/rack-armour-medium-upright-racking-protectors-hi-vis-yellow
· Rack Armour Large Upright Racking Protectors – Hi-Vis Yellow: https://www.hall-fast.com/brands/rack-armour/rack-armour-large-upright-racking-protectors-hi-vis-yellow
· Rack Armour XL Upright Racking Protectors – Hi-Vis Yellow: https://www.hall-fast.com/brands/rack-armour/rack-armour-xl-upright-racking-protectors-hi-vis-yellow
· Rack Armour XXL Upright Racking Protectors – Hi-Vis Yellow: https://www.hall-fast.com/brands/rack-armour/rack-armour-xxl-upright-racking-protectors-hi-vis-yellow
Safety Yellow Rack Armour Products
· Rack Armour Small Upright Racking Protectors – Safety Yellow: https://www.hall-fast.com/brands/rack-armour/rack-armour-small-upright-racking-protectors-safety-yellow
· Rack Armour Medium Upright Racking Protectors – Safety Yellow: https://www.hall-fast.com/brands/rack-armour/rack-armour-medium-upright-racking-protectors-safety-yellow
· Rack Armour Large Upright Racking Protectors – Safety Yellow: https://www.hall-fast.com/brands/rack-armour/rack-armour-large-upright-racking-protectors-safety-yellow
· Rack Armour XL Upright Racking Protectors – Safety Yellow: https://www.hall-fast.com/brands/rack-armour/rack-armour-xl-upright-racking-protectors-safety-yellow
Rack Armour Installation Tools
· Installation Tool for Small to Medium Rack Armour: https://www.hall-fast.com/brands/rack-armour/rack-armour-installation-tool-suitable-for-small-to-medium-rack-armour
· Installation Tool for Large to XL Rack Armour: https://www.hall-fast.com/brands/rack-armour/rack-armour-installation-tool-suitable-for-large-to-extra-large-rack-armour
Operations Where Rack Armour 300mm Is the Best Fit
The 300mm Small is widely used across many operating environments. Some of the most common deployment scenarios are described below.
Pedestrian-Truck Warehousing
Operations dominated by walk-behind and ride-on powered pallet trucks find the 300mm Small a natural fit. The strike profile of these machines is concentrated below the 300mm line, and the 300mm Small delivers complete coverage of the relevant zone.
Order Picking and Replenishment Operations
Pick-pack operations using low-level order pickers benefit from 300mm protection at the picking face uprights. The forward-facing aspect of these machines presents a low-level chassis profile that the 300mm Small fully addresses.
Archive and Document Storage
Long-aisle, high-density archive storage typically operates with very lightweight MHE moving along defined paths. The 300mm Small provides cost-effective coverage across very large upright populations.
Cold Storage Pick Faces
Cold store pick faces commonly use low-level pick trucks operating at the floor tier. The 300mm Small retains performance at chilled and frozen temperatures, providing protection where pick-truck contact is most likely.
Light Engineering and Manufacturing
Smaller manufacturing facilities often combine pallet racking with line-side buffer storage operated with pedestrian MHE. The 300mm Small is well suited to these environments, particularly where the wider site colour-coding standard specifies Safety Yellow.
Self-Storage and Commercial Hire
Self-storage facilities with mezzanine racking and commercial hire operations managing customer-handled goods benefit from visible, professionally-finished low-level protection. The 300mm Small delivers this without dominating the visual environment.
Rack Armour 300mm Versus Larger Variants in the Family
Choosing between the 300mm Small and larger variants is one of the most common questions specifiers face. The right choice depends on the strike profile of the MHE in use, the operating intensity of the site, and the budget envelope.
Versus Medium
The Medium variant offers extended height suited to slightly larger trucks and mixed operations. Sites using a combination of pedestrian and small counterbalance trucks often opt for Medium as a compromise position.
Versus Large
Large variants step up coverage further and are commonly chosen for mainstream pallet operations using compact reach trucks and small-mast counterbalance equipment. The Small 300mm focuses on the dominant low-level strike, while the Large variant extends coverage into the mid-zone.
Versus XL (600mm)
The XL variant covers 600mm of vertical exposure and is the default for facilities running mainstream MHE fleets at production cadence. Where the 300mm Small is right for low-level pedestrian operations, the XL is right for full MHE traffic at an aisle end.
Versus XXL
The XXL variant provides maximum coverage for facilities running tall counterbalance equipment, container handlers or drive-in racking with deep mast exposure. The 300mm Small and XXL sit at opposite ends of the family – a clear indication of how comprehensive the Rack Armour range is for matching protection to risk.
It is common for sites to deploy a mixed specification: 300mm Small as the baseline across long, lower-risk runs, with XL or XXL focused at aisle ends, drive-throughs and incident hotspots. Hall-Fast supplies all sizes and can advise on the optimum mix for your operation.
Choosing Between Hi-Vis Yellow and Safety Yellow for the 300mm Small
Both colour finishes deliver identical impact performance. The choice between them is driven by visibility requirements and visual-standard alignment.
Hi-Vis Yellow 300mm Small
The Hi-Vis Yellow finish provides maximum visual contrast against dark racking and dark stock. It is the strongest choice in low-light environments, in high-bay rack shadow, and in mixed-traffic environments where pedestrian-MHE interaction is significant. The fluorescent shade also draws attention from drivers travelling at speed.
Order Rack Armour Small Hi-Vis Yellow online: https://www.hall-fast.com/brands/rack-armour/rack-armour-small-upright-racking-protectors-hi-vis-yellow
Safety Yellow 300mm Small
The Safety Yellow finish aligns with the most common industrial yellow specified in corporate H&S colour standards. It coordinates well with floor marking paint, hand rails, bollards and other site infrastructure already specified to the same shade.
Order Rack Armour Small Safety Yellow online: https://www.hall-fast.com/brands/rack-armour/rack-armour-small-upright-racking-protectors-safety-yellow
Installing Rack Armour 300mm: Tools, Method and Best Practice
One of the most attractive aspects of Rack Armour 300mm for procurement teams is the speed and simplicity of installation. Each unit clips onto the upright in a matter of seconds using the dedicated Rack Armour Installation Tool sized for Small to Medium units.
Rack Armour Installation Tool – Small to Medium: https://www.hall-fast.com/brands/rack-armour/rack-armour-installation-tool-suitable-for-small-to-medium-rack-armour
Step-by-Step Installation
The installation process begins with a short visual check of the upright to confirm it is sound. The protector is presented to the base of the upright with the open face aligned to the front of the rack. The installation tool is used to engage the clip-on fit, which produces a positive locking action as the polymer shell wraps around the upright. A final visual check confirms the unit is fully seated, square to the floor, and free of any gap between the shell and the upright.
No Disruption to Live Operations
Because installation requires no power tools, no welding, no drilling, and no floor anchor, units can be fitted in a live warehouse without taking pallet positions out of service. Operatives simply observe a brief safe-working zone around each upright during fitting.
Time per Unit and Productivity
Once an operative is trained, installation of a 300mm Small is typically a matter of seconds per unit. A single trained installer can fit hundreds of units in a working shift, making large-scale deployment commercially viable even at in-house labour rates.
Sourcing Rack Armour 300mm Through Hall-Fast Industrial Supplies
Hall-Fast Industrial Supplies is a UK-based industrial supplier with a strong focus on warehouse safety, MRO and material handling. The Rack Armour brand is a core line in the Hall-Fast portfolio, and the team has deep experience advising on size selection, quantity, deployment phasing and accessory pairing.
UK Stock Availability
Hall-Fast holds Rack Armour stock in the UK, allowing fast despatch on everyday orders and reliable delivery against project schedules. Whether you need a handful of 300mm Small units for an immediate problem or several hundred for a multi-aisle deployment, the Hall-Fast team will fulfil promptly and accurately.
Authenticity Guaranteed
Hall-Fast supplies only authentic Rack Armour. Look-alike polymer protectors appear from time to time on the UK market but are rarely produced to the same tolerances or impact specification. Ordering through Hall-Fast guarantees the engineered Rack Armour performance behind every unit.
Expert Specification Support
Hall-Fast specialists will help you decide between the 300mm Small and other variants in the family, advise on Hi-Vis versus Safety Yellow for your environment, and recommend installation tooling and quantity. For larger projects the team can support a deployment plan tailored to your sites and operations.
Read more about Hall-Fast: https://www.hall-fast.com/about
Total Cost of Ownership: Why Rack Armour 300mm Pays Back Quickly
Although the 300mm Small carries a lower purchase price than the larger Rack Armour variants, the bigger commercial story is the total cost of ownership compared with steel-anchored guards or with no protection at all.
Avoided Rack Damage
Even at lower MHE speeds and lower truck weights, repeated low-level contact with an unprotected upright accumulates damage that eventually triggers a SEMA amber or red rating. Replacing damaged uprights involves stock decanting, specialist labour and replacement steel. Avoiding even a small number of these events per year typically pays back a 300mm Small deployment many times over.
Avoided Floor Damage
Floor-anchored steel guards transmit impact load into the slab, eventually spalling concrete around the anchor. Rack Armour 300mm Small is not floor-anchored and produces no floor damage, even after repeated impacts.
Faster Installation
Steel guards typically need contractor installation, drilling, anchoring and curing time. The 300mm Small is fitted in seconds by an in-house operative, removing the cost of contractor visits and method statements for every deployment phase.
Faster Replacement
If a 300mm Small unit is heavily impacted and needs replacing, the swap takes seconds and requires only an installation tool. Steel guards require anchor removal, floor patching and re-installation, often by a specialist contractor.
Rack Armour 300mm and UK Compliance Frameworks
Specifying Rack Armour 300mm contributes to the broader compliance posture of a UK warehouse without being a regulatory product in its own right. HSG76 places general duties on warehouse operators to manage the risk of contact between vehicles and structures. SEMA guidance covers inspection and remediation of racking. PUWER 1998 places duties on operators in respect of work equipment, including racking. None of these frameworks specifies a particular protection product, but they all create incentives to deploy reasonable, proportionate protection where impact risk is identifiable.
For low-level MHE operations, deploying 300mm Small protection at the most exposed uprights is a clear, defensible response to the risk. It demonstrates engagement with the duty to reduce risk, provides observable evidence in the event of an incident review, and complements the inspection regime by reducing the rate at which damage is generated.
Building a Risk-Based Specification for the 300mm Small
A short, structured risk-based specification helps procurement teams decide where 300mm Small protection delivers the most value.
Map MHE Strike Profiles
Identify the typical chassis bumper height, fork heel position and wheel spacing of every MHE type used on the site. Where these features sit below 300mm, the 300mm Small is the right protective height.
Identify Hot Locations
Aisle ends, cross-aisle intersections, dock entries and any column with recorded incident history are the natural priority for deployment. Sites with a damage log can target investment precisely; sites without one can use a Hall-Fast walk-through to identify visible damage patterns.
Plan a Phased Deployment
For larger sites, a phased deployment focused first on highest-risk uprights, then extending coverage into adjacent locations as budget allows, delivers the strongest early ROI. Hall-Fast can support a deployment plan that matches stock arrival to your installation schedule.
Maintaining and Replacing Rack Armour 300mm Over Time
Maintenance is intentionally low-effort. The polymer shell tolerates routine warehouse cleaning, does not corrode and does not flake or chip. The principal maintenance activity is a brief visual check during the daily PRRS walk and the annual SARI inspection.
When a unit is replaced, the swap is fast and uses the same installation tool originally used to fit the unit. Logging replacements in the racking inspection register provides useful data on impact frequency at specific locations and can drive subsequent decisions about additional safety measures such as supplementary signage, training interventions or the deployment of larger Rack Armour variants where the strike profile justifies an upgrade.
Industry Scenarios Where Rack Armour 300mm Delivers the Strongest Value
Looking at how the 300mm Small performs in real operating environments brings the specification decision to life. Below are several scenarios drawn from common UK warehouse profiles where the 300mm Small consistently outperforms both larger Rack Armour variants and traditional steel guards on a value-per-pound basis.
Scenario A: A 12-Aisle Pick-Pack Operation
A mid-sized pick-pack operation running low-level order pickers across 12 aisles experiences regular minor contact at picking-face uprights. The strike profile is dominated by chassis bumpers and fork heels, all sitting comfortably below the 300mm line. Deploying the 300mm Small at every picking-face upright on each side of every aisle delivers complete coverage of the relevant strike zone, at a unit count and unit cost that fits within an opex budget rather than requiring a major capex case. The avoided rack damage, avoided downtime and improved housekeeping appearance all contribute to a fast payback.
Scenario B: A Multi-Site Retail Back-of-House Estate
A retailer operating multiple back-of-house storage areas across a national estate is rolling out a consistent racking-protection standard. The dominant MHE across the estate is electric pallet trucks and walk-behind stackers, with strike profiles below 300mm. Specifying the 300mm Small as the estate-wide standard delivers a consistent visual standard, simplifies stock management for the facilities team, and keeps the per-store deployment cost low enough to fit within a typical store-improvement budget. Hall-Fast supports this kind of rollout with consolidated ordering, reliable UK stock and a price promise that scales across multi-site spend.
Scenario C: A Frozen Distribution Centre
A frozen DC running pedestrian-operated pallet trucks at picking faces and small reach trucks for replenishment is reviewing its racking protection. At the picking faces, the 300mm Small delivers the right protection height for the pedestrian fleet at the right cost, while XL units are deployed at aisle ends for the heavier reach truck contact. The polymer-shell construction tolerates the sub-zero environment, and the visible Hi-Vis Yellow finish helps operatives judge clearances under cold-store lighting.
Scenario D: An Archive and Records Storage Operation
An archive operation storing high volumes of records across long aisles operates with light-duty MHE moving along narrow paths. The 300mm Small is deployed across the entire estate as a baseline protection layer, with no need to upgrade to larger variants because the strike envelope of the MHE in use never exceeds 300mm. The unit cost is low enough to make blanket coverage commercially viable, delivering complete confidence in the rack-damage risk profile.
Building the Business Case: Indicative ROI for Rack Armour 300mm
Building the business case for any racking-protection investment starts with a transparent view of the avoided cost. Take a typical mid-sized operation running 20 aisles of pallet racking with low-level MHE. The site might experience two to four upright damage events per year that require structural intervention. Each event might cost £400 to £900 in remediation, plus stock decanting, productivity loss and any downstream availability impact. The annual exposure is therefore in the region of £800 to £3,600 in pure remediation cost, before considering the wider operational consequences.
A 300mm Small deployment at every aisle-end upright on a 20-aisle layout requires 40 units. At the unit cost typical of authentic Rack Armour, this is a one-off spend that the avoided remediation cost typically pays back within the first year of operation. Extending coverage to picking-face uprights and any column with a recorded incident history adds incremental cost but typically delivers even faster payback because these locations have the highest hit rate.
The Hall-Fast price promise is an important part of the business case. By guaranteeing the most competitive UK terms, Hall-Fast removes the procurement burden of multi-supplier price-discovery and lets the focus stay on getting the right specification deployed quickly.
Sustainability and Lifecycle Considerations for the 300mm Small
Procurement decisions increasingly include a sustainability dimension, and the 300mm Small has a useful lifecycle story. Most importantly, it avoids the embodied impact associated with replacing damaged steel uprights – the manufacture, transport and installation of new fabricated steel is significantly more carbon-intensive than the polymer protector that prevents the damage in the first place.
The polymer construction itself has a long service life across many minor impacts and tolerates routine cleaning without surface degradation. There is no paint to flake, no rust to develop and no anchor to corrode in a damp warehouse environment. At end of life, the polymer can be processed through industrial recycling streams. For organisations tracking Scope 3 emissions and circularity metrics, the 300mm Small is a helpful contributor to the wider sustainability narrative around warehouse operations.
Rack Armour 300mm Versus Alternative Protection Approaches
Procurement teams typically consider three alternative approaches alongside Rack Armour 300mm: traditional steel guards, no protection at all, and bolt-on look-alike polymer products.
Versus Steel Guards
Steel guards provide rigid mass-based protection but transfer impact directly into the upright and the floor. They require contractor installation, drilling, anchoring and curing time, and their failure mode after a heavy strike is often more dramatic and more disruptive than a polymer protector. The 300mm Small delivers controlled energy absorption, in-house installation and rapid replacement at a far lower total cost of ownership.
Versus No Protection
Doing nothing is not a credible option for most professionally-managed UK warehouses. The duty under HSG76 and PUWER, the cost of remediating SEMA-flagged damage, and the operational impact of unplanned rack downtime all make a strong case for at least a baseline level of protection. The 300mm Small is often the most cost-effective entry-point for organisations moving from no protection to a managed protection standard.
Versus Look-Alike Polymer Products
Look-alike polymer protectors appear from time to time on the UK market. Their impact performance is rarely independently validated to the same standard as authentic Rack Armour, and their fit tolerances often vary. Specifying authentic Rack Armour through Hall-Fast guarantees the engineered performance behind the brand and the supply-chain integrity behind the product.
Common Deployment Patterns for Rack Armour 300mm Across UK Sites
Specifiers often find it useful to start from a tried and tested deployment pattern and adjust to local conditions, rather than designing a deployment from scratch. Several patterns have emerged as common practice across UK warehousing.
The Aisle-End Pattern
The simplest pattern protects every upright at the entry and exit of every aisle. These columns face the highest traffic density and are where most contact occurs. For pedestrian-MHE sites, the 300mm Small at every aisle end provides comprehensive protection of the dominant strike zone with a manageable unit count.
The Cross-Aisle Plus Aisle-End Pattern
Adding cross-aisle intersection columns to the aisle-end baseline catches the next tier of high-traffic uprights. Cross-aisle traffic includes equipment turning, accelerating, decelerating and changing direction, all of which elevate the strike risk relative to mid-aisle locations. This pattern is particularly valuable in larger warehouses with multiple cross-aisles.
The Picking Face Pattern
In pick-pack operations the picking-face uprights are exposed to constant low-level pick-truck contact. Deploying the 300mm Small at every picking-face upright in a pick aisle delivers comprehensive coverage of the dominant strike zone for that operating profile.
The Blanket Coverage Pattern
Some operations adopt a blanket coverage pattern, deploying the 300mm Small at every front-facing upright in every aisle. This pattern is particularly common in archive operations, self-storage facilities and other low-MHE-speed environments where the unit count is high but the per-unit cost story makes blanket coverage commercially viable.
The Hotspot-First Pattern
For sites with limited budget and a clear damage history, the most efficient pattern is to deploy at every column with two or more recorded incidents in the previous 12 months, then extend coverage as budget allows. This concentrates spend exactly where the risk has been demonstrated rather than spreading it evenly across the rack run.
Hall-Fast has supported all of these deployment patterns and can advise on the most cost-effective approach for your specific operation. Whether you need a design conversation, a quotation against a defined Bill of Materials, or support sequencing the deployment over multiple phases, the team is ready to help.
Coordinating with Wider Site Safety Programmes
Rack Armour 300mm deployments are often most successful when coordinated with the wider site safety programme. Consider pairing the rollout with operative refresher training on careful manoeuvring around uprights, with floor marking updates that reinforce safe travel paths, and with refreshed signage at aisle entries. The visible protection provides a clear cue to the workforce that the organisation is investing in damage prevention, which often reinforces a broader culture of careful operation. Many sites pair Rack Armour deployment with the introduction of a near-miss reporting culture so that strike events and clearance issues are surfaced before they become recordable damage.
Hall-Fast Price Promise – We Will Not Be Beaten on Price
Hall-Fast Industrial Supplies offers a clear, honest commitment to every customer buying authentic Rack Armour: we will not be beaten on price. If you find a lower price for any genuine Rack Armour product anywhere else on the internet, or you have received a written quotation from another UK supplier, simply share the details with our team and we will match it. There is no small print and no awkward qualification process – the goal is to give you confidence that ordering through Hall-Fast secures the best possible commercial outcome alongside the strongest technical and aftersales support in the UK market.
The price promise applies to every Rack Armour size from Small through to XXL, in both Hi-Vis Yellow and Safety Yellow finishes, and extends to the official Rack Armour installation tools. Whether you are placing a single trial order to evaluate the product or specifying for a multi-site rollout that involves thousands of units, you can be confident that Hall-Fast will deliver the best available price together with the experience and supply reliability that larger operations demand.
To activate the price promise, request a quotation or place an order online: Contact the Hall-Fast team or visit the Rack Armour brand page to buy online.
Frequently Asked Questions About Rack Armour 300mm
Is the 300mm Small big enough for my site?
If your site is dominated by pedestrian-operated MHE and your strike profile is consistently below the 300mm line, the 300mm Small is the right specification. If you operate counterbalance or reach trucks, a larger variant is usually a better fit. The Hall-Fast team can advise on size mix.
Will the 300mm Small fit my brand of pallet racking?
The product fits the most common upright widths used by major UK rack manufacturers. For non-standard profiles, contact Hall-Fast for fit advice and test fits.
Can I install in a live warehouse?
Yes. There is no welding, drilling or floor anchoring – just a simple clip-on fit using the installation tool. Operatives only need to ensure a brief safe-working zone around the upright during fitting.
Does the 300mm Small need an inspection regime?
Like the rest of the Rack Armour family, the 300mm Small is included in the site's normal racking inspection regime. A brief visual check during the daily PRRS walk is sufficient.
Does the 300mm Small work in a cold store?
Yes. The polymer retains performance at chilled and frozen temperatures.
