Weekly Hire: Lever Hoist / Pull Lift – 3t

Reliable 3 Tonne Lever Hoist / Pull Lift Available for Hire

Hire a versatile 3 tonne lever hoist — also known as a pull lift, ratchet lever hoist, or come-along — for everyday lifting and pulling tasks across the Midlands and Yorkshire. Unlike chain blocks, lever hoists can be used at virtually any angle, making them the go-to tool for pulling, tensioning, lifting, and load positioning in confined spaces or where a vertical lift isn't practical. The HFHIRE014 offers a substantial 3 tonne safe working load in a compact, manually operated unit.

Key Features at a Glance

This 3 tonne lever hoist is built for safe, reliable lifting and pulling:

• Safe Working Load (SWL) of 3 tonnes for medium-duty operations
• 1.5 metre height of lift (HOL) for controlled, short-distance lifts
• Suitable for lifting and pulling at virtually any angle
• Free-wheel mechanism allows chain to be pulled freely when not under load
• Wind-through feature for easy slack-taking and chain adjustment
• Safety latch fitted to hook to prevent slings or loads slipping off
• Easy to install and remove with minimal set-up time
• Ideal for tight spaces and locations without a power supply

Lever Hoists vs Chain Blocks — What's the Difference?

While both lever hoists and chain blocks are manual lifting tools, they're designed for different jobs. A chain block uses a hand chain pulled in a continuous loop and is optimised for vertical overhead lifting. A lever hoist uses a short, ratcheting lever and can operate at any angle — vertical, horizontal, or any orientation in between — making it equally effective for lifting, pulling, and tensioning. That makes the HFHIRE014 a hugely versatile tool for jobs where a chain block simply wouldn't work: tensioning structural components, pulling loads horizontally, recovery work, load positioning, and rigging in tight or awkward spaces.

Free-Wheel and Wind-Through for Quick Set-Up

The free-wheel mechanism allows the load chain to be pulled freely through the hoist when it's not under load — meaning you can quickly extend or retract the chain to the right length before rigging. Once a load is attached, the ratchet takes over for safe, controlled lifting or pulling via the lever handle. The wind-through feature makes it easy to take up slack quickly, getting you to the working position with minimal effort.

Versatile Pulling and Lifting Power

At 3 tonnes capacity, the HFHIRE014 sits in the sweet spot for many everyday applications — substantial enough to handle structural pulls, machinery positioning, plant maintenance, vehicle recovery, and general rigging, while still being light enough for one person to rig and operate comfortably. Because it's manual rather than powered, there's no need for a power supply, making it ideal for use on remote sites, in confined spaces, or anywhere running cables and hoses isn't practical.

Versatile Rigging Options

The HFHIRE014 can be attached directly to a suitable fixed anchor point and used for both vertical lifts and angled pulls. As with any lifting accessory, it's essential that the anchor, sling, or rigging arrangement is rated appropriately for the load — our team can advise on the right combination for your specific application.

Hire Rather Than Buy

Certified lifting equipment requires regular inspection, testing, and documentation to remain compliant with LOLER regulations. Hiring offers a cost-effective alternative to outright purchase — giving you access to fully tested, ready-to-use lifting equipment without the capital outlay, ongoing certification costs, or storage requirements. It's a practical solution for one-off projects, short-term installations, or covering temporary peaks in workload.

Full Specification

Lever Hoist Hire Across the Midlands and Yorkshire

We supply lever hoist and pull lift hire to customers across a wide area, including:

East Midlands: Nottingham, Mansfield, Loughborough, Leicester, Derby, Coventry

South Yorkshire: Sheffield, Chesterfield, Barnsley, Doncaster, Rotherham

West Yorkshire: Leeds, Wakefield, Bradford, Halifax, Huddersfield

If your project is based in or around any of these towns and cities, we can supply the lifting equipment you need, when you need it.

Who Uses 3 Tonne Lever Hoist Hire?

The HFHIRE014 is regularly hired by construction contractors, civil engineers, structural steel installers, factory and manufacturing teams, mechanical and electrical contractors, plant installers, recovery and salvage specialists, garage and workshop operators, and maintenance crews. Wherever loads up to 3 tonnes need to be lifted, pulled, or tensioned — and especially where the lift needs to happen at an angle, in a confined space, or without a power supply — a lever hoist is one of the most practical tools you can hire.

Hire With Confidence

All our hire lifting equipment is supplied fully tested, certified, and inspection-ready, giving you complete confidence in compliance with LOLER (Lifting Operations and Lifting Equipment Regulations) requirements. Our experienced team can also advise on the most appropriate hoist capacity, configuration, and accessories for your specific application.

Get in Touch to Hire the HFHIRE014 Lever Hoist

To check availability, request a quote, or discuss your lifting requirements, get in touch with our team today:

 Call us on 01623 645645

 Or fill in the contact form below — we'll get back to you as quickly as possible.

We're on hand to help you get the right lifting and pulling equipment, in the right place, at the right time — across Nottingham, Sheffield, Leeds, Derby, and the wider Midlands and Yorkshire regions.