Rack Armour® Installation Tool - Suitable for Small to Medium Rack Armour

Built for the Sizes You'll Install Most

The Rack Armour® Installation Tool for Small (Euro A) and Medium (Euro B) is the fitting arm and hook system used on the most-installed sizes in the Rack Armour® range. Medium (Euro B) is the standard upright size on most UK pallet racking, which means it's the size most warehouses install in volume across a site-wide rollout. Small (Euro A) typically fills out the same rollout on lighter-duty racking, mezzanine support legs, and smaller-profile uprights.

Both sizes clip on by hand — that's a core advantage of Rack Armour® over steel rack guards. But fitting hundreds of them by hand across a multi-day project is a different proposition. This tool isn't about brute leverage (the smaller sizes don't need it) — it's about speed and ergonomics across repetition. The kind of cumulative time and strain saving that compounds quickly when you're working through aisle after aisle.

Our Price Promise: We won't be beaten on price for any authentic Rack Armour® product. Send us a lower online price or written quote and we'll match it.

Why It Matters on Bulk Rollouts

A single Rack Armour® Small or Medium protector takes seconds to fit by hand. Multiply that by 300, 500, or 1,000 uprights across a warehouse site, and the picture changes:

• Time per upright adds up fast. Even shaving a few seconds off each fitting saves hours across a site-wide rollout. Across multi-site projects, the hours become days.
• Repetitive bending strains installers. Clipping protectors at floor level means repeated bending, kneeling, and forcing the clips closed. Across a multi-day install, that's a real ergonomic load — and a manual handling concern your H&S team will recognise.
• Consistency matters. Hand-fitted protectors can vary in how cleanly they seat against the upright. The tool produces a more consistent fit across hundreds of installations, which matters for a coordinated finish across the warehouse.

When You Need This Tool

• Site-wide and multi-site rollouts. Anyone fitting more than 50 Small or Medium protectors across a project benefits.
• In-house facilities teams. If your own staff are doing the install rather than a contractor, the tool keeps them productive across the full project rather than slowing as fatigue sets in.
• H&S-conscious installs. Reduces the manual handling and repetitive strain associated with bulk hand-fitting at floor level.
• Ongoing replacement programmes. If you're routinely replacing protectors that have absorbed multiple impacts over their service life, the tool keeps that maintenance cycle quick and easy.

Key Features

• Purpose-designed fitting arm and hook system for Rack Armour® upright protectors
• Sized for Small (Euro A) and Medium (Euro B) Rack Armour® protectors
• Speeds repetitive installs on bulk and site-wide rollouts
• Reduces installer strain across multi-day projects
• Helps deliver a consistent, properly-seated fit on every upright
• Industrial-grade construction for repeat warehouse use
• Works with both Hi-Vis Yellow and Safety Yellow finishes

Compatible With

• Rack Armour® Small Upright Protectors (Euro A — up to 87mm)
• Rack Armour® Medium Upright Protectors (Euro B — up to 100mm)
• Available in both Hi-Vis Yellow and Safety Yellow finishes

For Large (Euro C), XL (Euro D), and XXL (Euro E) Rack Armour® protectors, a separate fitting tool is recommended — those sizes use stiffer clip tensions and benefit from a tool designed specifically for the additional leverage required.

What's Included and What's Not

This listing is for the installation tool only. Rack Armour® upright protectors are sold separately and are not included with the tool. If you're equipping a team for a site-wide install, you can add the tool, your protectors, and any other rack protection products to a single order — and we'll quote project pricing where the volume supports it.

Built for Repeat Warehouse Use

The fitting tool is industrial-grade and designed for continuous use across the kind of multi-day install projects typical of warehouse rollouts. It's a one-time purchase that supports the installation of thousands of protectors over its working life, making it a sensible addition to any site-wide or multi-site project.

Add It to Your Rack Armour® Project Order

If you're installing Small or Medium Rack Armour® protectors at any meaningful volume, this tool earns its place in the order. It's especially valuable for facilities teams installing protectors with their own staff, where keeping installers fresh and productive across a multi-day project directly affects how quickly the rollout lands. Order alongside your protectors today, and remember our price match promise covers every authentic Rack Armour® product.

Do I really need this tool — can't I just fit Small and Medium protectors by hand? Yes, you can — and for a handful of protectors, that's the right approach. The Small and Medium sizes are designed to clip on by hand without leverage. Where the tool earns its place is on bulk installs: hundreds of protectors across a site, multi-day rollouts, or ongoing replacement programmes. At that volume, the time and ergonomic savings from the tool become significant.

Which Rack Armour® sizes is this tool for? This installation tool is designed for the Small (Euro A / up to 87mm) and Medium (Euro B / up to 100mm) sizes. It works with both the Hi-Vis Yellow and Safety Yellow variants of these sizes.

Is there a separate tool for the larger Rack Armour® sizes? Yes. The Large (Euro C), XL (Euro D), and XXL (Euro E) sizes use a different fitting tool (product code HFRACKAR11) designed for the additional leverage their stiffer clip tensions need. If you're standardising installation across the full Rack Armour® range, you'll typically want both tools — contact us for combined pricing.

Does this come with any Rack Armour® protectors? No. This listing is for the installation tool only. Rack Armour® upright protectors are sold separately. You can add both to a single order — and project pricing is available if you're ordering protectors and tools together at volume.

How does the tool actually help on the smaller sizes if they fit by hand anyway? On Small and Medium sizes, the value isn't leverage — it's speed and ergonomics across repetition. Hand-fitting one protector is fine. Hand-fitting 500 protectors at floor level across two or three days is hard on installers' wrists, knees, and backs, and adds up to real time loss. The tool keeps each fitting quick and consistent, and reduces the manual handling load across the project.

Is it suitable for contractor use? Yes. The tool is industrial-grade and designed for repeat use across site rollouts. Contractors fitting Rack Armour® across multiple client sites typically carry both the small/medium and large/XL/XXL tools as standard kit.

Do you offer project pricing if I'm ordering this with a large quantity of protectors? Yes. For multi-size, multi-site, or high-volume orders we can quote project pricing across protectors and tools. Contact us with your specification and quantities.

Do you really price match? Yes — our price promise covers every authentic Rack Armour® product, including accessories like this installation tool. Send a lower online price or a written quote and we'll match it.