Jerry Can 10L - Black

Compact Diesel Storage. Smarter by Design. Built to Last.

The JC5RB 5 Litre Black Steel Jerry Can is a purposefully engineered compact diesel storage solution that goes meaningfully beyond the capabilities of a standard plastic fuel can — combining a wide flat anti-tip profile, powder-coated exterior, internal corrosion-resistant coating, and a spout retaining handle into a heavy-duty steel construction designed to address the everyday practical frustrations of fuel storage and transport with genuine, built-in solutions. Finished in black for immediate diesel identification, the JC5RB delivers the stability, durability, and long-term corrosion resistance that professional and domestic diesel users need from a compact, portable fuel can they will rely on season after season.

Whether used as a portable diesel reserve for generators, garden machinery, small site plant, or vehicles, or as a dependable compact fuel supply for overland, agricultural, and recreational applications, the JC5RB combines heavy-duty steel performance with the practical design refinements that make it a more stable, more reliable, and more convenient fuel storage solution than conventional alternatives at this capacity.

Wide Flat Anti-Tip Design — Stability That Makes a Real Difference

The defining design feature of the JC5RB is its wide flat profile — a deliberate geometric solution to one of the most common and frustrating practical problems of conventional jerry can use. Standard narrow-profile fuel cans are inherently prone to tipping — on workshop benches, in vehicle boots, on uneven ground, and in the backs of vans and trailers where road vibration and cornering forces act on upright containers throughout a journey. A tipped fuel can at best creates inconvenience and delay; at worst it results in diesel spillage, cap damage, and a serious safety and environmental incident.

The wide flat base geometry of the JC5RB dramatically lowers the centre of gravity and significantly increases the stability footprint, creating a resting position that actively resists tipping even as the diesel level drops and the weight distribution inside the can changes during use. At the compact 5 litre scale — where lighter, smaller cans are inherently more susceptible to being knocked or toppled than larger containers — this anti-tip geometry is a particularly valuable and practically important design enhancement.

The wide flat profile also makes the JC5RB exceptionally practical for organised storage and space-efficient transport — sitting stably and compactly in vehicle boots, van load areas, trailer storage, and workshop shelving without the need for additional restraints, brackets, or supports to prevent rolling or tipping.

Heavy-Duty Steel Construction — Durability That Outlasts Plastic

The JC5RB is constructed from heavy-duty steel — a material choice that provides a fundamentally superior level of impact resistance, structural integrity, and working longevity compared to plastic fuel cans of equivalent capacity. Steel construction protects the can against the punctures, dents, and structural deformation that can compromise the fuel containment of plastic cans when subjected to the knocks, drops, stacking loads, and rough handling that characterise genuine professional and domestic working environments.

For a 5 litre diesel can that is likely to be carried, transported, stacked, and used repeatedly across many seasons of practical use, the heavy-duty steel construction of the JC5RB provides a resilience and durability that plastic alternatives simply cannot replicate. A well-maintained steel jerry can will comfortably outlast multiple generations of plastic fuel cans of equivalent capacity, making the JC5RB a sound and cost-effective long-term investment for regular diesel storage users — whether in a domestic garage, an agricultural setting, or a professional site environment.

Powder-Coated Exterior — Long-Lasting Rust and Corrosion Protection

The exterior of the JC5RB features a powder-coated black finish — a surface treatment that provides substantially superior rust and corrosion resistance compared to the conventional painted finishes found on standard steel fuel cans. Powder coating applies a dry powder electrostatically to the steel surface before heat curing, creating a thick, hard, and uniformly bonded protective layer that adheres more durably to the underlying steel than liquid paint — resisting chipping, scratching, moisture penetration, and the chemical exposure that diesel storage environments regularly involve.

For a compact fuel can stored in garages, agricultural outbuildings, vehicle boots, and site compounds — environments where moisture, condensation, temperature cycling, and occasional chemical splash are routine — the powder-coated exterior of the JC5RB provides meaningful and lasting protection against the surface rust that degrades the appearance, structural integrity, and long-term reliability of conventionally finished steel containers over time.

Critically, the powder-coated black finish also maintains the visual clarity of the diesel colour coding throughout the full working life of the can — ensuring the JC5RB remains immediately and reliably identifiable as a diesel container even after years of regular use, without the fading, chipping, or dulling that conventional paint finishes progressively exhibit. In any fuel storage environment where colour coding is the primary safety mechanism for preventing misfuelling, this long-term colour integrity is a genuinely important specification.

Internal Coating — Protecting Diesel Quality From the Inside

Alongside the powder-coated exterior protection, the JC5RB features an internal protective coating specifically engineered to prevent internal corrosion and safeguard the quality and cleanliness of the diesel stored within the can. In any steel fuel container lacking an adequate internal coating, prolonged contact between stored diesel and bare steel causes progressive oxidation and rust formation on the interior surfaces — introducing contaminating rust particles into the stored fuel that can block fuel filters, damage injection pumps, and cause costly and frustrating engine and equipment problems over time.

For users storing diesel for generators, heating equipment, garden machinery, and small site plant — where fuel contamination can cause significant and expensive servicing issues — the clean, rust-free storage provided by the JC5RB's internal coating is a practically important specification that protects both the fuel and the equipment it powers. Every litre dispensed from the JC5RB is as clean and uncontaminated as it was at the moment of filling, regardless of how long it has been stored in the can between uses.

The internal coating also contributes to the long-term structural integrity of the can itself — preventing the internal rust formation that progressively weakens steel walls and seams from the inside and can ultimately compromise the fuel containment reliability of unprotected containers over an extended working life.

Spout Retaining Handle — Organised, Accessible, and Always Ready

A practical and thoughtfully implemented design detail of the JC5RB is its spout retaining handle — a handle construction specifically designed to keep the pouring spout securely in place and immediately accessible when the can is not in active use. On conventional jerry cans, the pouring spout is a separate loose accessory requiring independent storage between uses — creating the familiar and time-wasting frustration of searching for a misplaced spout, keeping it clean and undamaged, and locating it quickly when refuelling is needed.

The spout retaining handle of the JC5RB eliminates this problem entirely. The spout is always exactly where it needs to be — retained securely by the handle design, protected from loss or contamination, and ready for immediate deployment without delay or searching. For users who refuel diesel equipment regularly as part of a working routine — whether maintaining a generator, topping up site plant, or refuelling agricultural machinery — this integrated spout retention delivers a genuine and consistently appreciated convenience that makes every refuelling operation faster, cleaner, and more straightforward.

Colour-Coded Black — Immediate, Reliable Diesel Identification

The JC5RB is finished in black — the established and widely recognised colour code for diesel within a properly organised, colour-coded fuel storage system. The durability of the powder-coated finish ensures this identification colour remains bright, clear, and immediately recognisable throughout the full working life of the can — maintaining the visual fuel identification that prevents misfuelling accidents consistently and reliably, even as the can accumulates the marks of regular working use across many seasons.

The black JC5RB pairs naturally with the JC5RG green unleaded and JC5MR red lead replacement compact steel jerry cans, creating a complete, colour-coded 5 litre fuel identification system for any garage, workshop, or site compound where multiple fuel types are stored and managed alongside one another.

Suited to a Wide Range of Applications

The JC5RB's combination of anti-tip stability, heavy-duty steel durability, powder-coated exterior protection, internal fuel quality protection, and integrated spout retention makes it a versatile and practically refined choice across a broad range of compact diesel storage applications:

• Portable diesel generators — compact fuel reserves for domestic backup and small site power
• Diesel portable space heaters — site welfare and temporary heating fuel supply
• Garden and agricultural machinery — diesel walk-behind and handheld equipment fuel reserves
• Small site plant and tools — compact diesel-powered equipment requiring portable fuel supply
• Marine diesel outboards — small leisure and working craft fuel storage
• Overland and off-road travel — stable, impact-resistant compact diesel reserve for 4x4 and adventure vehicles
• Emergency diesel reserves — dependable standby fuel supply for vehicles and equipment
• Groundskeeping and estate machinery — portable diesel fuel for outdoor equipment

Key Features at a Glance

• Wide flat anti-tip design — stable storage and transport, highly resistant to tipping
• Heavy-duty steel construction for outstanding impact resistance and long-term durability
• Powder-coated black exterior for superior, long-lasting rust and corrosion protection
• Internal protective coating — prevents rust contamination of stored diesel
• Spout retaining handle — keeps the pouring spout secured and always immediately accessible
• Black colour-coded for immediate and reliable diesel identification
• 5 litre capacity — compact and lightweight for easy everyday handling

Technical Specifications