Draper 230V Bandsaw, 228mm, 300W
Bench mounted bandsaw built to a high specification and ideal for trade professionals. Designed to cut wood, wood derived materials and plastics. The adjustable blade tensioning and tracking allows for precise cutting. There is a high spec mitre guide for crosscut work. The strong table tilts with a 0-45° range allowing angled cutting, ripping and mitre and bevel cutting. No-volt release switch prevents uncontrolled blade to re-start after power interruption. Supplied with 10tpi blade, parallel rip fence and other accessories.
- Adjustable blade tensioning and tracking for precise cutting
- Mitre guide for crosscut work. Graduated to 30 degrees for both left and right hand angles
- Table tilting with 0-45 degree range
- Fitted with a no-volt on/off switch and 53mm dust extraction outlet
- Supplied with 10tpi blade, parallel rip fence and other accessories
Specification
Voltage | 230V |
Frequency | 50Hz |
Input | 300W |
No load speed | 1400rpm |
Maximum throat capacity | 228mm |
Cutting depth | 90mm |
Maximum capacity | 125mm |
Cutting speed | 10.6m/sec (635m/min) |
Table size | 300 x 300mm (Tilt to 45°) |
Bandsaw dimensions | 510 x 370 x 755mm |
Weight | 19kg |
Free delivery on all online orders over £54.99, delivered to the UK mainland only; A small order charge of £6.95+ vat is charged on all orders under £54.99 (net).
Some products are subject to an additional shipping surcharge due to their size and weight, contact us for details. Many of our items are available for next day delivery, where items are made to order or not currently in stock delivery times will vary.
Please contact us for a confirmed delivery date or alternatively a representative will confirm your order. Special delivery services are available; please contact our Sales Office to discuss your specific requirements.
The following postcodes will be subject to a delivery surcharge: AB31 to AB56, FK17-FK21, IV1-IV56 & IV63, JE1-JE5, KW1-KW17, PA21-PA40, PH4-PH41, PH49, PH50, HS, KA27, KA28, PA20, PA41-PA78, PH42-PH44 and ZE, This also includes Northern Ireland. Certain products within our range are subject to a delivery surcharge when delivered to additional areas in Scotland than those already listed.
We offer bulk discounts on all our products.
If you would like to find out more about bulk order discounts from Hall-Fast Industrial Supplies Ltd please contact us on 01623 645 645 or email sales@hall-fast.com.
Estimated delivery is for guidance only, an exact delivery date will be confirmed on your order acknowledgement. Please contact us for further information.We make every effort to ensure that the information provided on this page is accurate, we can not be held responsible for any errors, typography or otherwise. Illustrations and images are representational of typical styles and designs may vary. Prices and specifications may alter without prior notice.