Draper 230V Bandsaw, 228mm, 300W

Step up to trade-grade cutting performance with the Draper BS228/300D 228mm 300W Bench Bandsaw — a high-specification machine built for professionals who demand accuracy, power and reliability in equal measure. With a larger throat capacity, deeper cut depth and greater motor output than entry-level bandsaws, the BS228/300D is engineered to handle the demands of a busy trade workshop day after day.

High-Specification Trade Construction

Built to a higher specification than standard workshop bandsaws, the BS228/300D offers a robust and rigid platform for consistent, repeatable cuts. Weighing in at 19kg with dimensions of 510 × 370 × 755mm, this is a substantial, stable machine that stays firmly planted during operation. Every component is designed with the trade professional in mind — from the precision blade system to the high-spec mitre guide.

Greater Capacity for Demanding Workloads

The BS228/300D steps up where lighter bandsaws leave off. With a 228mm maximum throat capacity, a 90mm cutting depth and a 125mm maximum capacity, it accommodates larger stock sizes that would challenge a smaller machine. Whether you're resawing thick hardwood planks, cutting wide boards or working with bulkier timber sections, this bandsaw has the capacity and power to cope.

Precision Cutting Controls

Adjustable blade tensioning and tracking gives you full control over blade positioning, ensuring accurate, drift-free cuts throughout the workpiece. The high-spec mitre guide, graduated to 30° in both left and right directions, delivers repeatable crosscut accuracy for joinery, cabinet making and furniture work. The tilting table (0–45°) allows for a full range of angled cuts including ripping, bevel cutting and mitre work — all from a single, versatile machine.

Safety First

The no-volt release switch prevents the blade from automatically restarting after a power interruption — an essential safety feature for any trade environment. A 53mm dust extraction outlet connects to workshop extraction systems, keeping the work area clean and visibility clear.

Ready to Work Straight from the Box

The BS228/300D is supplied complete with a 10tpi blade — finer than the blades typically supplied with lighter bandsaws — along with a parallel rip fence and additional accessories, so you can get straight to work without additional purchases.

Full Specification

Key Features

• 300W motor — increased power output for trade-level performance
• 228mm throat capacity and 90mm cutting depth for larger stock
• 125mm maximum cutting capacity
• High-specification build quality — designed for trade professionals
• Adjustable blade tensioning and tracking for precise, drift-free cutting
• High-spec mitre guide graduated to 30° left and right
• Tilting table — 0 to 45 degrees for angled, bevel, ripping and mitre cuts
• No-volt release switch — prevents uncontrolled restart after power failure
• 53mm dust extraction outlet
• Supplied with 10tpi blade, parallel rip fence and accessories
• 230V / 50Hz — UK mains compatible

BS228/300D vs BS200/250SF — How Does It Compare?

For customers considering both Draper bench bandsaws, the BS228/300D is the more capable, trade-focused option:

The BS228/300D delivers more power, more capacity and a finer blade — making it the clear choice for professional or high-volume use.

What Can the BS228/300D Cut?

Designed to cut through a wide range of materials with ease:

• Solid timber — hardwoods and softwoods including oak, ash, pine and MDF-adjacent hardwoods
• Wood-derived sheet materials — MDF, plywood, chipboard, OSB and laminated boards
• Plastics — engineering plastics, acrylic sheet and similar materials

The revolving endless saw band, carried on two band wheels, delivers a smooth and consistent cutting action with minimal vibration and breakout.

Who Is the BS228/300D For?

• Joiners and carpenters needing a dependable, high-capacity bench bandsaw for daily trade use
• Furniture makers and cabinet makers working with larger stock and demanding tighter tolerances
• Shopfitters and timber fabricators cutting a variety of board sizes and profiles
• Serious woodworking enthusiasts who want a trade-grade machine in a home workshop setting

Frequently Asked Questions

How does the BS228/300D differ from a standard home workshop bandsaw?
It is built to a higher specification with a more powerful 300W motor, greater throat capacity (228mm vs the typical 200mm), deeper cutting depth (90mm) and a larger maximum capacity of 125mm — making it better suited to trade environments and heavier workloads.

What blade comes with the BS228/300D?
A 10tpi (teeth per inch) blade is supplied, offering a finer cut than the 7tpi blades typically found on lighter machines. This produces smoother results in wood and wood-derived materials.

What is the maximum cutting depth?
The cutting depth is 90mm, with a maximum capacity of 125mm.

Can the table be tilted for angled cuts?
Yes — the table tilts from 0 to 45 degrees, enabling bevel cuts, angled ripping and mitre work alongside standard straight cutting.

Does it have dust extraction?
Yes, the BS228/300D is fitted with a 53mm dust extraction outlet for connection to a workshop extractor or vacuum system.

Is the no-volt switch a standard safety feature?
Yes — the no-volt release switch is fitted as standard and prevents the blade from restarting automatically after any power interruption, which is an important safety requirement in trade and professional environments.