Draper Long Chassis Trolley Jack, 2 Tonne

When standard trolley jack heights simply aren't enough, the Draper TJ2LR is the answer. This purpose-built high-lift trolley jack reaches a remarkable 800 mm maximum height — more than 300 mm higher than a conventional trolley jack — making it the right tool for lifted trucks, 4x4s, motorhomes, vans on raised suspension, or any application where deep under-vehicle access is essential. The 660 mm stroke and a lifting range of 140–800 mm give it a versatility that no standard-height jack can match.

The long 1,355 mm chassis is the structural foundation that makes this extreme lift range possible. It provides the extended, stable footprint needed to keep the jack secure at height — where a shorter chassis would introduce unwanted movement or flex under load. Rear swivelling castors make repositioning smooth and easy, even given the jack's substantial 58 kg working weight.

Getting to height is fast thanks to the quick-lift foot pedal, which rapidly raises the 117 mm saddle to the vehicle's jacking point without the effort of repeated handle pumps. The T-shaped handle then takes over for precise controlled lifting up to the full 2 tonne (2,000 kg) rated capacity. Crucially, the T-handle incorporates an integrated release valve with a deliberate actuation design — accidental lowering is prevented, so the vehicle stays exactly where you put it until you choose to bring it down.

A built-in safety overload valve provides protection against exceeding the rated capacity, and the jack is manufactured, tested and certified to the EN1494 standard. For anyone regularly working beneath taller or lifted vehicles, the TJ2LR is a specialist tool that makes the job safer and considerably more comfortable.

Key feature

• 800 mm maximum height — over 300 mm taller than a standard trolley jack for lifted trucks, 4x4s and vans
• 660 mm stroke — exceptional reach across a 140–800 mm lifting range
• Long 1,355 mm chassis — extended footprint provides stability at extreme lift heights
• Quick-lift foot pedal — rapidly raises the saddle to the vehicle jacking point
• 2 tonne (2,000 kg) rated capacity
• T-shaped handle with integrated release valve — prevents accidental lowering for added safety at height
• 117 mm large saddle — aids accurate positioning on chassis rails and jacking points
• Rear swivelling castors — improves manoeuvrability when repositioning the jack
• Safety overload valve — prevents operation beyond rated capacity
• EN1494 manufactured, tested and certified