Draper Jet Force Propane Space Heater, 34,000 BTU/10 kW

The Draper PSH10C is a high performance 34,000 BTU (10kW) propane jet force space heater designed to deliver fast, powerful heating in workshops, garages, and other open or semi-open environments. Built around a steel burner assembly with Piezo push-button ignition, a solenoid thermocouple safety valve, and a thermal overload protection device, it combines serious heating output with the safety features essential for reliable use in busy working environments. Supplied with a 1.5m gas hose, regulator, cable, and approved plug, the PSH10C is ready to connect and use immediately.

Key Features

The PSH10C delivers 10kW of heat output — sufficient to warm spaces of up to 4,000 cubic feet — via a high performance steel burner assembly that produces a directed jet of warm air across the working area. The 300m³/h fan circulates heated air effectively through the space, bringing a cold workshop or garage up to a comfortable working temperature quickly and maintaining it efficiently during use. At a maximum gas consumption of 0.74kg/h, it is meaningfully more economical than the higher-output PSH15C, making it the more cost-effective choice for spaces where 10kW provides adequate coverage.

Ignition is handled by a manual Piezo push-button system — no batteries required, no electrical ignition to fail. Once lit, the solenoid thermocouple valve monitors the flame continuously and closes the gas supply automatically if the flame is extinguished for any reason, preventing unburned gas from accumulating in the working environment. This thermocouple safety mechanism is an essential feature for any gas-fired heater used in a workshop or enclosed space, and its presence on the PSH10C provides important reassurance during extended use.

A thermal overload protection device is fitted to the fan motor, guarding against heat damage during prolonged operation and contributing to the long-term reliability of the unit. At 4.5kg and with compact dimensions of 425 x 240 x 352mm, the PSH10C is light and portable enough to reposition easily around a workshop or site as heating requirements change throughout the day. The 30W fan motor runs efficiently alongside the burner, and the 1.5m gas hose provides sufficient reach to position the heater away from the propane cylinder for safe and practical use.

Specifications

Who Is This Space Heater For?

The PSH10C is well suited to home workshop users, hobbyists, and small trade operations who need effective propane heating for a garage, workshop, or outbuilding of moderate size. The 4,000 cubic foot heating capacity covers a typical single or double garage comfortably, and the 10kW output brings these spaces up to a workable temperature quickly without the higher gas consumption of a 15kW unit. It is equally practical as a supplementary heat source on construction sites, at outdoor events, or in agricultural buildings where a portable, self-contained propane heater is the most convenient heating solution available.

Please note: the PSH10C is designed for use in open and semi-open environments only. Always ensure adequate ventilation when operating any gas-fired heater.

How Does the PSH10C Compare to the PSH15C?

The PSH10C and PSH15C share the same core design — steel burner assembly, Piezo ignition, solenoid thermocouple valve, thermal overload protection, 300m³/h airflow, and 1.5m hose. The key difference is output: the PSH10C delivers 10kW (34,000 BTU) with a maximum gas consumption of 0.74kg/h, suitable for spaces up to 4,000 cubic feet. The PSH15C delivers 15kW (50,000 BTU) at up to 1.11kg/h, covering spaces up to 5,000 cubic feet. The PSH10C is the right choice for smaller workshops, garages, and moderate-sized spaces where 10kW provides sufficient warmth — offering lower gas consumption and lower running costs than the PSH15C for applications where the additional output isn't needed.

Why Choose the Draper PSH10C?

The PSH10C makes a strong case for workshop and garage users who want effective propane heating without the running costs of a higher-output unit. The 10kW output is more than adequate for the majority of home workshop and single garage applications, and the 0.74kg/h maximum gas consumption delivers a meaningful saving in propane costs over a full working day compared to a 15kW heater. The Piezo ignition, thermocouple safety valve, and thermal overload protection provide the same safety specification as the PSH15C, ensuring the PSH10C is as reliable and safe to use as its higher-output sibling. For workshop and garage users who want proven Draper jet force heating performance at the output level that matches their space, the PSH10C is the efficient and well-priced choice.