Draper Hydraulic Motorcycle Scissor Lift, 135kg

The Draper MCPL3B is a hydraulic scissor lift designed for lighter motorcycles — mopeds, scooters, sport bikes and dirt bikes up to 135 kg — where the priority is precision working height rather than raw lifting capacity. Unlike the MC/ATV2B which lifts heavy motorcycles and ATVs to a fixed working height range, the MCPL3B raises smaller bikes to a remarkable 870 mm maximum height across four dedicated preset locking positions, putting the bike fully at standing working height for comfortable, ergonomic servicing from top to bottom.

The four preset locking heights — 475, 635, 755 and 865 mm — are the defining feature of this lift. Each position locks mechanically, giving the operator a secure, stable platform for sustained work at a specific height rather than relying on a continuous hydraulic hold. Starting from a 340 mm minimum entry, the foot-operated lever-style pedal drives the hydraulic pump to raise the platform quickly to the desired locking position. The wide 410 x 350 mm platform and rubber mat keep the bike firmly in place throughout the lift and during work.

A thoughtfully designed recess area within the platform table directly assists with one of the most common servicing tasks on smaller bikes — fluid and gearbox oil changes. The removable recess allows oil to drain cleanly without the awkward positioning and mess that comes with draining into a tray on the floor. Combined with the lift's generous working heights, it makes the MCPL3B as much a servicing workstation as a simple lift.

At 26 kg with a compact 455 x 410 mm base, the MCPL3B stores neatly in a home garage and is easy to position before use. Manufactured and individually certified to the EN1494 standard, it offers the same level of engineering assurance across the lighter end of the motorcycle lift range as the rest of the Draper lifting equipment catalogue.

Preset locking heights

Key feature

• 135 kg capacity — suited to mopeds, scooters, sport bikes and dirt bikes
• Four preset locking heights at 475, 635, 755 and 865 mm — secure mechanical lock at each position
• 870 mm maximum height — raises smaller bikes to full standing working height for ergonomic servicing
• 340 mm minimum entry height — slides under standard road and sport bikes with ease
• Removable platform recess — assists with gearbox and fluid oil draining without floor-level mess
• Foot-operated lever-style hydraulic pedal — smooth, hands-free raising to the desired locking height
• 410 x 350 mm rubber-matted platform — non-slip surface protects bike underside during lifting
• Compact 455 x 410 mm base — stores neatly in a home garage between uses
• Lightweight at 26 kg — easy one-person setup and repositioning
• EN1494 individually certified — meets European standards for hydraulic lifting equipment