Draper Expert Soft Grip Reversible Ratchet, 1/2" Sq. Dr., 72 Tooth

The benchmark 1/2" drive ratchet for the professional workshop — the Draper Expert 72-Tooth Soft Grip Reversible Ratchet (H72C/SG) combines a fine 72-tooth mechanism with a quick release button and soft grip handle to deliver the smooth operation, high-torque capability, and confident handling that demanding 1/2" drive applications require day in, day out.

1/2" Drive — Maximum Torque, Maximum Versatility

The 1/2" square drive is the platform of choice for the most demanding fastener work in the professional automotive and engineering workshop — wheel nuts, suspension components, drivetrain assemblies, large structural fixings, and any application where the higher torque demands of larger metric and imperial fasteners require a full 1/2" drive tool and socket combination. The quality of the 1/2" drive ratchet in a professional toolkit directly impacts performance across these critical, high-load applications — making the H72C/SG a tool worth investing in at the Draper Expert level.

72-Tooth Mechanism — Refinement at the High-Torque End

Delivering a 72-tooth mechanism on a 1/2" drive ratchet is a meaningful engineering commitment — the higher demands of 1/2" drive applications place greater stress on the ratchet mechanism than smaller drive sizes, and maintaining fine tooth engagement under these loads requires the precision manufacturing standards that define the Draper Expert range. The result is a 5° engagement arc between each tooth — one of the finest available in the 1/2" drive category — allowing productive fastener advancement with minimal tool movement in confined working environments, and delivering a smooth, refined ratcheting action that stands apart from the coarser feel of lower tooth-count mechanisms throughout everyday use.

For high-torque applications in restricted spaces — tight suspension bays, compact engine compartments, congested underfloor working areas — the 5° arc of the H72C/SG provides the fine movement capability to keep working efficiently where a 24 or 36-tooth ratchet would simply run out of usable swing.

Quick Release Button for Efficient, Safe Socket Changes

A quick release button on the drive head allows fast, confident one-handed socket changes across the full range of 1/2" drive sockets — keeping workflow efficient and the ratchet securely in hand without the need to manually pry off sockets. On a 1/2" drive tool where sockets are heavier and more securely retained than smaller drive sizes, the quick release is a practical safety and efficiency feature that makes a genuine difference to working pace, particularly during complex repairs involving frequent socket size changes across a wide range.

Chrome Vanadium Steel — Hardened, Tempered and Micro Satin Finished

The head and shaft of the H72C/SG are manufactured from chrome vanadium steel, hardened and tempered for the strength, toughness, and long-term fatigue resistance demanded by a 1/2" drive ratchet subjected to the higher torque loads and sustained mechanical stress of professional daily use. A micro satin finish provides reliable corrosion resistance alongside a refined, low-glare surface appearance — performing better in bright workshop environments than standard polished chrome and offering greater resistance to fingerprinting and light surface contamination through regular intensive use.

Soft Grip Handle for Comfort Under High-Torque Load

The soft grip handle delivers comfortable, cushioned handling during extended repair sessions — reducing hand and wrist fatigue during the sustained higher-torque applications typical of 1/2" drive work, and maintaining confident, secure tool control throughout the working day. On a ratchet regularly used for wheel nut removal, suspension overhauls, and drivetrain work where significant sustained force is applied, the quality and comfort of the grip has a direct impact on both working efficiency and user wellbeing over a long working day.

Manufactured to DIN3122 and ISO3315 Standards

The H72C/SG is manufactured and tested generally in accordance with DIN3122 and ISO3315 specifications — internationally recognised standards for ratchet handle construction and performance, providing professional users with confidence in the quality, consistency, and reliability of the tool across the most demanding 1/2" drive applications.

Key Features

• 1/2" square drive reversible ratchet with 72-tooth mechanism
• Fine 5° engagement arc for smooth, controlled operation in confined spaces
• High-torque capable 1/2" drive platform for wheel nuts, suspension and drivetrain work
• Quick release button for fast, safe one-handed socket changes
• Manufactured from chrome vanadium steel — hardened, tempered and micro satin finished
• Soft grip handle for all-day comfort and control under high-torque loads
• Manufactured and tested to DIN3122 and ISO3315 specifications
• Product Code: H72C/SG