Draper Expert Petrol Generator with Wheels, 2000W

When a job demands power that lasts a full shift without interruption, the Draper Expert PG253W delivers. Built around the same proven 196cc four-stroke OHV engine and dual voltage 220V/110V output as the Draper Expert generator range, the PG253W's defining advantage is its 15-litre fuel tank – the largest in the Draper generator lineup – providing 9 continuous hours of operation at 75% load. That's a full working day from a single fill, without fuel runs, without downtime, and without compromise.

Rated at 2,000W (2.2kVA) with a peak of 2,200W (2.75kVA), it delivers both 230V 16A and 110V 16A outputs for full UK site compliance, plus a 12V DC socket for battery charging. The heavy-duty steel tubular open frame is fitted with oil and fuel resistant anti-vibration mounts for longevity and stability, and an integrated wheel kit makes repositioning the 39kg unit straightforward without lifting. If you're running a building site, managing a hire fleet, or powering extended outdoor operations, the PG253W is built for the task.

Key Features & Benefits

15-Litre Tank – 9 Hours at 75% Load

The PG253W's headline specification is its fuel tank. At 15 litres – more than four times the capacity of the PG252F and the largest tank in the Draper generator range – it delivers a verified 9 hours of continuous operation at 75% load. That covers a full working day from 7am to 4pm without a single refuelling stop. For contractors managing multiple trades, hire operators running extended events, and site managers who can't afford mid-shift downtime, this runtime is a genuine operational advantage.

Dual Voltage Output – 230V and 110V AC

The PG253W outputs both 230V 16A and 110V 16A simultaneously, covering the full range of equipment used on UK construction sites. 110V CTE (centre-tapped earth) output meets HSE guidance for reduced low voltage power tools on site, while the 230V output handles standard mains equipment. No separate step-down transformer required – both voltages are built in and available at the same time.

12V DC Output with Charging Lead

A dedicated 12V DC socket, with charging lead supplied, allows simultaneous battery charging or 12V accessory use alongside the AC outputs. Keep a site vehicle battery maintained, charge a power pack, or run 12V equipment without interrupting the main AC supply.

Integrated Wheel Kit for Site Mobility

At 39kg, the PG253W is not a unit you want to carry – and you don't have to. The integrated wheel kit allows one person to manoeuvre the generator around a site, reposition it between working areas, load it onto a van tailgate, and adjust its placement throughout the day without lifting assistance. On a busy site where tool positions change as work progresses, this is a significant practical benefit.

196cc 4-Stroke OHV Engine – 6.5HP

The same high-quality 196cc forced air-cooled four-cycle overhead valve petrol engine that powers the rest of the Draper Expert generator range. OHV technology delivers efficient combustion, better fuel economy, and longer engine service life compared to older side-valve designs, with a rated output of 6.5HP providing ample power headroom for sustained simultaneous loads.

Engine Low Oil Shutdown

An automatic engine shutdown triggers before oil pressure drops to a damaging level, protecting the engine from the most common cause of generator failure. On a large site where generator monitoring isn't always the top priority, this protection is a meaningful safeguard for an expensive piece of equipment.

Heavy-Duty Steel Tubular Frame with Anti-Vibration Mounts

The open frame chassis is constructed from heavy-duty steel tube, protecting the engine and alternator from the knocks and drops inevitable on a working site. Oil and fuel resistant anti-vibration mounts reduce mechanical stress on internal components and vibration transfer to the ground, extending service life and reducing noise and fatigue in close-proximity operation.

E5 and E10 Fuel Compatible

Compatible with both E5 and E10 unleaded petrol – the standard fuel at most UK forecourts – so there's no specialist fuel requirement even with a 15-litre tank to fill.

Supplied with Full Starter Toolkit

Includes spark plug spanner, combination spanners, and 12V charging lead straight from the box.

Full Specification

What's in the Box

• Draper Expert PG253W Petrol Generator with Wheels
• Spark plug spanner
• Combination spanners
• 12V charging lead

SAE 10W-40 engine oil is available separately.

Who Is the Draper Expert PG253W For?

Construction Site Managers & Main Contractors – Power the full range of 110V CTE tools and 230V site equipment through a complete working day without the cost, risk, and downtime of mid-shift refuelling. The 9-hour runtime at 75% load is matched to a standard site working day.

Equipment Hire Fleets – A wheeled, high-runtime generator that minimises customer complaints about refuelling and maximises utilisation between service intervals. Dual voltage output means it suits the widest possible range of hire customers and site types.

Groundworks & Civil Engineering Contractors – Power pumps, compressors, lighting rigs, and tools on sites where a mains connection isn't available. The large tank capacity means less logistical overhead managing fuel supply on remote sites.

Outdoor Events & Temporary Installations – Power caterers, lighting, sound systems, and hospitality equipment through an entire event day from a single fill. The wheel kit makes positioning straightforward on grass, gravel, or hard standing.

Agricultural & Rural Operations – Run machinery, lighting, water pumps, and workshop tools in barns, fields, and outbuildings without relying on mains supply. The 9-hour runtime reduces the number of times you need to think about the generator during a busy working day.

Emergency & Disaster Response – A high-capacity power source for extended operations where reliability and runtime take precedence over size and weight.

Frequently Asked Questions

How does the PG253W differ from the Draper Expert PG252F? Both generators use the same 196cc engine and dual 220V/110V output, but the PG253W is built for situations where runtime is critical. Its 15-litre tank (vs 3.6L on the PG252F) delivers 9 hours at 75% load, compared to 4.2 hours on the PG252F. The PG253W also includes an integrated wheel kit for easier site mobility. If you need all-day power without refuelling stops, the PG253W is the right choice; if a lighter, more compact unit for shorter jobs is sufficient, the PG252F covers the need at lower cost and weight.

Is 2,000W enough to run multiple tools simultaneously? 2,000W rated (2,200W peak) is suitable for powering multiple low-to-medium draw tools at the same time – for example, a circular saw (1,000–1,400W) plus site lighting (100–300W), or an angle grinder (700–1,000W) plus a battery charger (200–400W) plus a radio and lighting. Avoid simultaneously connecting tools that each draw close to the full rated output. The dual voltage output means 110V and 230V equipment can run at the same time from their respective sockets.

What fuel and oil does the PG253W use? E5 or E10 unleaded petrol in the 15-litre tank. SAE 10W-40 engine oil in the 0.6-litre crankcase – available separately.

How do I move a 39kg generator around a site? The integrated wheel kit allows the generator to be tilted and rolled by a single person across most site surfaces. For lifting onto van beds or into storage, two people or a mechanical aid are recommended.

Why doesn't the PG253W have an inverter? Open frame site generators like the PG253W produce a conventional AC waveform suited to power tools, compressors, lighting, and other site equipment. Inverter technology – found in the DGI range – adds cost, reduces maximum output, and is primarily valuable for sensitive electronics. For site power tool use, a conventional open frame generator at this output and runtime level is the more practical and cost-effective choice.

Is the PG253W suitable for use on a UK construction site? Yes. The 110V 16A output meets the requirements for CTE (centre-tapped earth) power tool use in line with HSE guidance on reduced low voltage systems on UK construction sites.