Draper Expert Petrol Generator, 2000W
Meet the Draper Expert PG252F – a robust, professional-grade petrol generator engineered for tradespeople, contractors, and serious DIYers who need dependable power away from the mains. Delivering a rated output of 2,000W (2.2kVA) and a peak output of 2,200W (2.75kVA), this open frame generator is built to handle power tools, lighting, compressors, and more – on the building site, at outdoor events, or during power outages.
Powered by a 196cc forced air-cooled four-cycle OHV engine producing 6.5HP, the PG252F starts effortlessly via an easy-pull recoil start and runs for up to 4.2 hours from its 3.6-litre fuel tank at 75% load. With dual voltage AC output (220V and 110V) plus a 12V DC socket for battery charging, it covers every power demand in a single, portable unit.
Key Features & Benefits
Powerful 196cc 4-Stroke OHV Engine
The heart of the PG252F is a high-quality 196cc forced air-cooled, four-cycle overhead valve (OHV) petrol engine. OHV technology delivers better fuel efficiency, lower emissions, and longer engine life compared to older side-valve designs – giving you more power for less fuel over the long term.
Dual Voltage Output – 220V & 110V AC
Switch between 230V (16A) for standard UK site equipment and 110V (16A) for centre-tapped earth (CTE) tools that comply with UK construction site regulations. No need for a separate step-down transformer – the PG252F has both voltages built in, saving you cost and hassle on site.
12V DC Output for Battery Charging
The dedicated 12V DC socket, complete with a supplied 12V charging lead, lets you charge vehicle batteries, power DC accessories, or top up leisure batteries – making this generator ideal for campsites, agricultural use, and outdoor events as well as construction.
Anti-Vibration Mounts for Longer Life
Oil and fuel resistant anti-vibration mounts reduce stress on the engine and frame during operation, minimising wear and extending the service life of the generator. They also reduce operator fatigue in close-proximity working environments.
Heavy-Duty Steel Tubular Frame
The open frame design is built around a heavy-duty steel tubular chassis that protects the engine and alternator from knocks and drops on site. It's robust enough to handle the daily rigours of professional use while keeping the unit compact and relatively easy to transport at 35.5kg.
Engine Low Oil Shutdown
Run the generator dry of oil and you risk catastrophic engine damage. The automatic low oil shutdown cuts the engine before that can happen, protecting your investment and preventing costly repairs.
E5 and E10 Fuel Compatible
The PG252F is fully compatible with both E5 and E10 unleaded petrol – the standard fuel now available at UK forecourts. No additives or fuel treatments required; simply fill up and go.
Supplied with a Starter Toolkit
Comes ready to work straight from the box with a spark plug spanner, combination spanners, and a 12V charging lead included in the box.
Full Specification
Specification | Detail |
Product Code | PG252F |
Maximum AC Output | 2,200W (2.75kVA) |
Rated AC Output | 2,000W (2.2kVA) |
Sockets | 1 × 110V 16A, 1 × 230V 16A, 1 × 12V DC |
Engine Type | Forced air cooled four-cycle OHV |
Engine Capacity | 196cc Petrol |
Engine Output | 6.5HP |
Fuel Tank Capacity | 3.6 Litres |
Continuous Run Time | 4.2 hours at 75% load |
Noise Level | 95dB(A) at 4m |
Oil Capacity | 0.6 Litres |
Recommended Oil | SAE 10W-40 (available separately) |
Fuel Compatibility | E5 and E10 Unleaded Petrol |
Dimensions (L × W × H) | 640 × 450 × 470mm |
Net Weight | 35.5kg |
What's in the Box
- Draper Expert PG252F Petrol Generator
- Spark plug spanner
- Combination spanners
- 12V charging lead
SAE 10W-40 engine oil is available separately.
Who Is the Draper Expert PG252F For?
Construction & Trades – Power 110V site tools compliantly without a separate transformer. Run angle grinders, circular saws, lighting rigs, and compressors from a single portable unit.
Agricultural & Rural Use – Ideal for powering equipment in barns, fields, and outbuildings where mains power is unavailable.
Outdoor Events & Catering – Provide reliable AC power for catering equipment, PA systems, and lighting at outdoor gatherings and markets.
Emergency Home Backup – Keep essential appliances running during power cuts with instant recoil-start power at your fingertips.
Camping & Leisure – Charge leisure batteries, run lighting, and power appliances at campsites and off-grid locations.
Frequently Asked Questions
What fuel does the Draper PG252F use? The PG252F runs on standard unleaded petrol and is compatible with both E5 and E10 fuel – the type available at most UK filling stations.
What oil does the Draper PG252F take? The engine uses SAE 10W-40 oil. Oil capacity is 0.6 litres. Always check the oil level before starting. Oil is available separately.
How long will the PG252F run on a full tank? With a 3.6-litre fuel tank, the generator provides approximately 4.2 hours of continuous run time at 75% load.
Can I use the PG252F on a UK construction site? Yes. The 110V 16A output is suitable for CTE (centre-tapped earth) tools used on UK construction sites in accordance with HSE guidance on reduced low voltage systems.
Does the generator have overload protection? The PG252F features an engine low oil shutdown to protect against engine damage. Always ensure rated loads are not exceeded to protect connected equipment.
How loud is the Draper PG252F? The noise level is rated at 95dB(A) measured at 4 metres. As with all open-frame generators, it is recommended for outdoor use only. Always follow local noise regulations.
This open frame generator is powered through a high-quality 196cc petrol engine with recoil start, held in a heavy duty steel tubular frame. It has oil and fuel resistant anti-vibration mounts. The generator delivers dual voltage output 220V/110V and 12V DC. Supplied with a spark plug spanner, combination spanners and 12V charging lead. Compatible with E5 and E10 fuel.
- Powered by 4-stroke engine
- Easy pull recoil start
- Steel tubular frame
- Dual voltage output 220/110V
- 12V DC output
- Fitted with oil and fuel resistant anti-vibration mounts
- Engine low oil shutdown
- Supplied with 12V charging lead and basic toolkit
- Compatible with E5 and E10 fuel
Specification
Maximum AC output | 2,200W (2.75kVA) |
Rated AC output | 2,000W (2.2kVA) |
Sockets | 1 x 110V 16A, 1 x 230V 16A, 1 x 12V DC |
Engine type | Forced air cooled four cycle OHV |
Engine capacity | 196cc Petrol |
Engine output | 6.5HP |
Fuel tank | 3.6L |
Continuous run time | 4.2 hours at 75% load |
Noise | 95dB(A) at 4m |
Oil capacity | 0.6L |
Oil | SAE 10W-40 (available separately) |
Dimensions | (L) 640 x (W) 450 x (H) 470mm |
Weight (net) | 35.5kg |
Free delivery on all online orders over £54.99, delivered to the UK mainland only; A small order charge of £6.95+ vat is charged on all orders under £54.99 (net).
Some products are subject to an additional shipping surcharge due to their size and weight, contact us for details. Many of our items are available for next day delivery, where items are made to order or not currently in stock delivery times will vary.
Please contact us for a confirmed delivery date or alternatively a representative will confirm your order. Special delivery services are available; please contact our Sales Office to discuss your specific requirements.
The following postcodes will be subject to a delivery surcharge: AB31 to AB56, FK17-FK21, IV1-IV56 & IV63, JE1-JE5, KW1-KW17, PA21-PA40, PH4-PH41, PH49, PH50, HS, KA27, KA28, PA20, PA41-PA78, PH42-PH44 and ZE, This also includes Northern Ireland. Certain products within our range are subject to a delivery surcharge when delivered to additional areas in Scotland than those already listed.
We offer bulk discounts on all our products.
If you would like to find out more about bulk order discounts from Hall-Fast Industrial Supplies Ltd please contact us on 01623 645 645 or email sales@hall-fast.com.
Estimated delivery is for guidance only, an exact delivery date will be confirmed on your order acknowledgement. Please contact us for further information.We make every effort to ensure that the information provided on this page is accurate, we can not be held responsible for any errors, typography or otherwise. Illustrations and images are representational of typical styles and designs may vary. Prices and specifications may alter without prior notice.
