Draper Expert Extra Long Reversible Quick Release Soft Grip Ratchet, 1/2" Sq. Dr., 48 Tooth

When reach is everything, the Draper Expert Extra Long 48-Tooth Reversible Ratchet (H64C-XL/B) delivers — a premium 1/2" square drive ratchet engineered with an extended handle length that provides the additional leverage and reach needed to access deeply recessed fasteners, work across wider engine bays, and apply greater torque on stubborn or heavily loaded fixings without resorting to a breaker bar.

Extra Long Handle — More Leverage, More Reach

The defining characteristic of the H64C-XL/B is its extra long handle, which provides two distinct and equally valuable advantages over a standard-length 1/2" drive ratchet. First, the extended reach allows the tool to access fasteners set further back within engine bays, chassis assemblies, and mechanical housings — positions where a standard ratchet handle cannot comfortably or safely reach without awkward body positioning. Second, the additional handle length delivers greater mechanical leverage, reducing the physical effort required to break out and torque heavily loaded fasteners — a meaningful practical advantage during suspension overhauls, drivetrain work, and chassis maintenance where large, heavily torqued fixings are routinely encountered.

For professional technicians working daily on larger vehicles, vans, SUVs, and light commercial platforms — where engine bays are deeper and fastener access is more challenging — the extra long handle of the H64C-XL/B transforms what is achievable with a ratchet alone, often eliminating the need to switch to a breaker bar or extension bar for initial fastener movement.

48-Tooth Mechanism for Reliable All-Round Performance

The 48-tooth ratchet mechanism delivers an engagement arc of 7.5° between each tooth — providing a strong balance between the fine operation needed in tighter working spaces and the robust, reliable engagement expected from a high-torque 1/2" drive tool used on the most demanding fastener applications. The 48-tooth count is a proven and practical choice for a 1/2" drive extra long ratchet where mechanical strength under sustained high-torque loading is as important as fine arc movement, delivering confident, consistent performance across the full range of applications the extended handle enables.

Quick Release Button for Efficient Socket Changes

A quick release button on the drive head enables fast, confident one-handed socket changes throughout the job — keeping workflow smooth and the ratchet securely in hand without manually prying sockets free. On a 1/2" drive extra long ratchet used across a wide range of socket sizes and applications in a demanding professional environment, the quick release is a practical daily-use feature that meaningfully speeds up tool changes and maintains safe, efficient working pace throughout complex repairs.

Spring-Loaded Ball Bearing for Positive Socket Retention

A spring-loaded ball bearing in the drive head provides positive socket retention, keeping sockets securely seated during use and preventing unwanted disengagement mid-operation — particularly important on an extra long ratchet where the extended handle introduces additional leverage and movement that could otherwise dislodge a socket at a critical moment. This retention mechanism works in conjunction with the quick release button to provide both security during use and fast release when needed.

Chrome Vanadium Steel — Hardened, Tempered and Shot Blast Matt Finished

The head and shaft of the H64C-XL/B are manufactured from chrome vanadium steel, hardened and tempered for the strength, toughness, and fatigue resistance demanded by an extra long 1/2" drive ratchet operating at the higher torque levels that the extended handle enables. A shot blast matt finish provides reliable corrosion resistance alongside a clean, non-reflective surface appearance that performs well in bright workshop environments and resists fingerprinting and light surface contamination better than standard polished chrome alternatives throughout regular intensive use.

Soft Grip Handle for Comfort Under Extended Load

The soft grip handle delivers comfortable, cushioned handling during extended repair sessions — particularly valuable on an extra long ratchet where the extended handle length means greater leverage forces are transmitted through the grip during high-torque applications. The soft grip reduces hand and wrist fatigue during sustained use and maintains confident, secure tool control throughout the working day — ensuring the additional capability of the extended handle can be fully exploited without discomfort.

Manufactured to DIN3122 and ISO3315 Standards

The H64C-XL/B is manufactured and tested generally in accordance with DIN3122 and ISO3315 specifications — internationally recognised standards for ratchet handle construction and performance, providing professional users with confidence in the quality, consistency, and reliability of the tool across the most demanding extended-reach 1/2" drive applications.

Key Features

• Extra long 1/2" square drive reversible ratchet for extended reach and greater leverage
• 48-tooth mechanism — 7.5° engagement arc balancing fine operation with high-torque strength
• Quick release button for fast, one-handed socket changes
• Spring-loaded ball bearing for positive socket retention during use
• Manufactured from chrome vanadium steel — hardened, tempered and shot blast matt finished
• Soft grip handle for comfort and control under high-torque extended-reach loads
• Manufactured and tested to DIN3122 and ISO3315 specifications
• Product Code: H64C-XL/B