Draper D20 20V Brushless Combi Drill (Sold Bare)

The Draper D20CD60 is a versatile 20V brushless combi drill built for tradespeople and serious DIYers who need a capable, lightweight drilling and driving tool that integrates directly into an existing D20 battery setup. Weighing just 1.4kg bare and delivering up to 60Nm of torque, it strikes a practical balance between power and manoeuvrability — comfortable to use in tight spaces, overhead, and in the kind of awkward positions that heavier drills make difficult.

Equipped with a two-speed gearbox, 20-position torque control, a 13mm metal keyless chuck, and a maximum impact rate of 29,700bpm in hammer mode, the D20CD60 handles drilling in wood, steel, brick, and masonry as well as precision screwdriving across a wide range of fixing sizes. An adjustable side handle with depth rod, forward/reverse switch, and integrated LED worklight complete a feature set that punches well above the tool's compact weight.

Sold as a bare tool, the D20CD60 is the ideal choice for anyone already running D20 20V batteries from elsewhere in the Draper D20 range. Batteries and chargers are available separately.

Key Features & Benefits:

Brushless Motor Technology
The high-performance brushless motor delivers greater efficiency, extended runtime per battery charge, and significantly longer service life than brushed alternatives. It runs cooler under sustained load — important for a combi drill used across varied tasks throughout a working day — and reduces the long-term maintenance costs associated with carbon brush replacement.

Two-Speed Gearbox with Variable Speed
The two-speed gearbox gives you a meaningful step-change in operating characteristics to suit different tasks. Low gear delivers higher torque at reduced speed — ideal for driving large screws, working in hardwood, or drilling with large-diameter bits. High gear provides faster rotation for efficient drilling in softer materials and smaller bit sizes. Combined with the variable speed trigger, you have precise, responsive control across the full working range.

20-Position Torque Control
The 20-setting torque collar allows fine-grained clutch adjustment to match the output precisely to the fixing, material, and screw size in use. This prevents over-driving and stripping — protecting both the fixing and the workpiece surface — and ensures consistent screw depth across repeated operations on the same material.

13mm Metal Keyless Chuck
The 13mm metal keyless chuck accommodates a wide range of drill and driver bits with a secure, one-handed grip — no chuck key required. The metal construction provides greater durability and a more positive bit retention than plastic-bodied chucks, particularly important when working with larger bits under load.

Hammer Mode with 29,700bpm Impact Rate
In hammer mode, the D20CD60 delivers 29,700 impacts per minute — providing the percussive action needed to drill efficiently through brick, block, and masonry. The hammer selector switches cleanly between standard drill and hammer modes, with a forward/reverse switch for bit extraction and screw removal.

Drilling Capacities:

• Wood: up to 35mm
• Steel: up to 13mm
• Brick/Masonry: up to 10mm

Adjustable Side Handle with Depth Rod
The auxiliary side handle can be repositioned to suit left- or right-handed users and a variety of working angles, providing additional support and control during hammer drilling and high-torque applications. The depth rod clips in to maintain consistent hole depths across repeated drilling operations — removing the need to mark each hole individually.

Ultra-Bright LED Worklight
The integrated LED activates during use to illuminate the chuck, bit, and work surface — providing clear visibility in wall cavities, under-floor spaces, loft areas, and any poorly lit working environment.

Ergonomic Soft Grip Handle with Belt Clip
The contoured soft grip reduces vibration transmission and hand fatigue during extended use, while the belt clip allows the drill to be secured hands-free when moving between fixings or up and down a ladder — a small detail that makes a genuine difference on busy sites.

Battery & Compatibility:

The D20CD60 accepts any D20 20V Li-ion battery — 1.5Ah, 2.0Ah, 3.0Ah, or 4.0Ah — from Draper's D20 interchangeable cordless platform. If you already own D20 batteries from another tool in the range, this drill integrates into your existing setup without any additional battery investment. For sustained use across a full working day, a 3.0Ah or 4.0Ah battery is recommended to maximise runtime between charges. Batteries and chargers are sold separately.

How It Compares to Other D20 Combi Drills:

The D20CD60 sits as a compact, lightweight option in the D20 drill lineup — at 1.4kg bare it is notably lighter than larger combi drills in the range, making it the better choice for overhead work, confined spaces, and extended use where tool weight causes fatigue. The two-speed gearbox and 20 torque settings provide comprehensive control for most drilling and driving applications. Users who need more torque for heavier structural work or larger masonry capacities should consider stepping up to the higher-specification D20 combi drill models.

Specification Summary:

Warranty:

The Draper D20CD60 is covered by a 24-month manufacturer's warranty as standard. Register your tool with Draper to extend this to 36 months free of charge — an additional year of manufacturer-backed protection at no extra cost.

Does the Draper D20CD60 come with a battery and charger?
No — the D20CD60 is sold as a bare tool. D20 20V Li-ion batteries and chargers are available separately, or any existing D20 battery from the Draper D20 range can be used directly.

What materials can the Draper D20CD60 drill through?
The D20CD60 drills up to 35mm in wood, 13mm in steel, and 10mm in brick and masonry. In hammer mode it delivers 29,700 impacts per minute for efficient penetration of brick and block.

What is the advantage of a two-speed gearbox on a combi drill?
Low gear provides higher torque at reduced speed — ideal for driving large screws and drilling with large-diameter bits in dense materials. High gear delivers faster rotation for efficient drilling in softer materials and smaller bit sizes. Switching between gears adapts the drill's behaviour to the task, rather than relying on trigger speed alone.

How many torque settings does the Draper D20CD60 have?
The D20CD60 features 20 torque settings, allowing precise clutch control to prevent over-driving screws and protect workpiece surfaces across a wide range of materials and fixing sizes.

Is the Draper D20CD60 compatible with all D20 batteries?
Yes — the D20CD60 is part of Draper's D20 20V interchangeable battery system and accepts any D20 Li-ion battery regardless of capacity.

How much does the Draper D20CD60 weigh?
The bare tool weighs 1.4kg, making it one of the lighter combi drills in the D20 range and well suited to overhead work, confined spaces, and extended use where minimising tool weight reduces fatigue.