Draper 230V Wet and Dry Vacuum Cleaner with Stainless Steel Tank and Integrated Power Out-Take Socket, 30L, 1300W

Workshop-Ready, Built to Last – Stainless Steel Wet and Dry Vacuum with Power Take-Off

The Draper WDV30SSPA is a serious workshop and garage vacuum built around a stainless steel tank that takes the knocks of daily professional use without complaint. With a 1600W motor, 30-litre capacity, integrated power take-off socket, blower function and a comprehensive accessory kit, it covers everything from fine dust extraction alongside power tools to wet spill clean-up and heavy debris collection.

Stainless Steel Tank – Built for Tough Environments

Where plastic tanks flex, dent and degrade under sustained workshop use, the stainless steel collection tank of the WDV30SSPA holds its shape and resists the impacts, chemicals and moisture that are a routine part of garage and trade environments. It's a straightforward choice for anyone who needs a vacuum that stays in working condition year after year rather than one that needs replacing.

Integrated Power Take-Off Socket – Automatic Extraction with Any Power Tool

The built-in power take-off socket (rated at 1300W) lets you plug your power tool directly into the vacuum. When the tool runs, the vacuum runs. When the tool stops, the vacuum stops. It's the simplest way to ensure dust and debris are captured at source from the very first moment of cutting, sanding or grinding – without any additional switching or setup.

This makes the WDV30SSPA a practical dust extraction partner for sanders, jigsaws, routers, circular saws and other workshop power tools up to 1300W.

Dust Clearing Button and Blower Function

The dedicated dust clearing button dislodges accumulated dust from the filter to restore suction performance during extended use – a useful feature that keeps the vacuum working consistently without a full filter-clean stop. The blower function redirects airflow for clearing dust and debris from benches, vents, machinery and hard-to-reach workshop corners before vacuuming.

30-Litre Capacity – Less Emptying, More Working

The 30-litre tank gives you a full working session's capacity for most workshop tasks without needing to stop and empty. When it does need draining after wet pick-up, the large drain plug makes the process clean and straightforward – no tilting, no mess.

Practical Design Throughout

Every element of the WDV30SSPA's design reflects workshop use. Castors provide easy mobility around a garage or site. Quick-release clasps make tank access fast when emptying or switching between wet and dry configurations. On-board tool storage keeps all accessories clipped to the machine so attachments are always to hand. A carry handle makes repositioning straightforward despite the 7.3kg weight.

The 5-metre cable with approved plug gives useful reach around a workshop or garage without an extension lead.

Full Accessory Kit Included

Supplied with a comprehensive 35mm accessory set:

• 2m suction hose
• Telescopic metal tube
• Foam filter, cloth filter and dust bag
• Dual-action floor brush
• Metal base floor head
• Round brush
• Crevice tool

All accessories use the standard 35mm diameter fitting, ensuring broad compatibility with other 35mm workshop vacuum accessories.

Key Features:

• Stainless steel tank for durability in tough workshop and garage environments
• 1600W motor with 18kPa vacuum pressure and 53 L/s airflow
• 30-litre capacity for extended working sessions
• Integrated power take-off socket (1300W rated) – auto start/stop with power tools
• Blower function for clearing debris from surfaces and machinery
• Dust clearing button to restore filter performance during use
• Large drain plug for clean, easy tank emptying after wet pick-up
• Quick-release clasps for fast tank access
• On-board tool storage for all accessories
• Castors and carry handle for easy mobility and repositioning
• 5m cable with approved plug
• Full 35mm accessory kit included
• Wet and dry pick-up capability

Technical Specifications:

What is the power take-off socket and what tools can I use with it?
The power take-off socket lets you plug a power tool directly into the vacuum. The vacuum then automatically starts and stops with the tool, ensuring dust is extracted from the moment the tool begins working. The socket is rated at 1300W, so it is compatible with most handheld power tools including sanders, jigsaws, routers and circular saws within that rating.

Why choose a stainless steel tank over plastic?
Stainless steel is more resistant to impact, heat, chemical exposure and long-term wear than plastic – all relevant factors in workshop and garage environments. It won't crack under knocks, degrade with exposure to solvents, or warp near heat sources. For a vacuum that's going to live in a working workshop, the stainless steel construction is a practical long-term choice.

How does the dust clearing button work?
The dust clearing button agitates or pulses the filter to dislodge accumulated dust during use, restoring filter permeability and maintaining suction performance without requiring a full stop to manually clean the filter. It's particularly useful during sustained extraction tasks.

Can I use the blower and vacuum functions with the same accessories?
The blower function reverses airflow through the hose, so the same hose and attachments can be used in blower mode to clear surfaces and machinery before switching back to vacuum mode to collect the displaced debris.

How do I drain the tank after wet pick-up?
The large drain plug at the base of the stainless steel tank allows the collected liquid to be drained cleanly without tilting or removing the tank. Open the plug over a suitable drain or container and allow it to empty.

Are replacement filters and bags available?
Yes – replacement foam filters, cloth filters and dust bags are available separately. All accessories and attachments use the standard 35mm diameter fitting, ensuring compatibility with a wide range of workshop vacuum accessories.