Bunker Workbench, 1829mm

Full width. Full capacity. Nothing to add.

The Bunker Workbench at 1829mm is the foundational flagship of the BUNKER workbench range — a clean, purposeful, full-width professional workshop bench built from premium-quality steel, rated to 295kg across both working surfaces, and finished with the retaining lip detail that prevents the small parts and tools that matter most from disappearing off the edge of the bench at the worst possible moment. No drawers, no pegboard, no specialist functions — just a seriously capable, properly built primary workbench that does exactly what a workbench should do, at a width that gives you room to actually work.

1829mm of Working Space. Properly Used.

At 1829mm wide and 787mm deep, the Bunker workbench provides one of the largest primary working surfaces in the BUNKER range — expansive enough to handle large fabrications, engine teardowns, full woodworking projects, and multi-tool working simultaneously without the bench feeling crowded or compromised. The worktop is rated to a 295kg static load, putting it firmly in the professional category and well beyond the capacity of most workshop benches at any width. Whether the bench carries engine blocks, heavy fabrications, timber assemblies, or the accumulated weight of a full day's working spread, the worktop handles it without concern.

295kg Below as Well as Above

The lower storage shelf matches the worktop's 295kg load rating — a structural lower tier that handles heavy components, equipment cases, bulk materials, and workshop supplies at the same professional specification as the working surface above it. For workshops where the floor around the bench tends to accumulate the overflow from the worktop, a properly rated lower shelf that keeps heavy items accessible, organised, and off the floor makes a meaningful difference to how efficiently the workspace functions on a busy day. Two working surfaces, both rated to 295kg — a consistent, professional specification throughout.

Retaining Lips. Everywhere.

Retaining lips run around all four sides of both the worktop and the lower shelf — a practical design detail that contains rolling tools, small parts, fixings, bearings, drill bits, and the countless small items that find their way onto a working bench surface during the course of a job. On a full-width 1829mm bench where the edges are further from the centre of the working area, that containment is particularly valuable — items placed near the edge stay on the surface rather than rolling off unnoticed. It's the kind of detail that feels like common sense once you've worked with it, and is immediately missed when it isn't there.

Ready to Assemble. Ready to Work.

The Bunker 1829mm Workbench arrives with a ready-to-assemble design and all necessary fittings supplied — no sourcing additional hardware, no missing components, and a straightforward assembly process that gets the bench into working use without unnecessary delay. Adjustable feet compensate for the uneven and imperfect floor surfaces common to garages, workshops, and site environments, bringing the bench to a stable, level working position wherever it is installed and eliminating the rocking and instability that throws off precise work on a fixed-leg bench.

Premium Steel. Industrial Standards.

The Bunker 1829mm Workbench is constructed from premium-quality steel throughout — a material specification that delivers the load capacity, structural rigidity, and long-term durability that professional workshop use demands. At 65.8kg, the assembled bench carries genuine solidity and presence — stable during vigorous working, resistant to racking under lateral load, and built to remain in active daily service across years of professional use rather than seasons of occasional weekend work. As with all BUNKER workbenches, it is delivered on a pallet and requires two people to safely lift and position during installation.

The Clean Primary Bench

Without the locking drawer of the B300-WB72D variant or the integrated power pegboard of the power workbench range, the Bunker 1829mm Workbench is the cleanest, most versatile configuration in the BUNKER range — a full-width primary bench that adapts to whatever the job demands without fixed features constraining how it can be used. Wall-mounted storage, overhead racking, the BUNKER Load-Up Stacking System, and the wider BUNKER workshop range can all be built around it, creating a complete and coordinated workshop setup anchored by a bench that prioritises working capacity above all else.

Key Features:

• 1829mm wide professional workbench
• 295kg worktop static load capacity
• 295kg lower shelf static load capacity
• Retaining lip on all four sides of worktop and shelf
• Adjustable feet for stability on uneven surfaces
• Ready-to-assemble with all fittings supplied
• Premium-quality steel construction throughout
• Delivered on pallet — requires two people to install
• Weight: 65.8kg

Specification: Dimensions: W 1,829 x H 914 x D 787mm | Weight: 65.8kg | Worktop capacity: 295kg | Shelf capacity: 295kg

Product Code: B300-WB72