Bunker 14 Piece Modular Storage Combo 2 Tier Racking with Stainless Steel Shelving, Pegboards and Floor Cabinet, 1500mm

Fourteen pieces. A complete storage system. A single floor cabinet that does it all.

The Bunker 14 Piece Modular Storage Combo with Stainless Steel Shelving at 1500mm is a comprehensively specified complete workshop storage system built around a single, feature-rich floor cabinet that combines seven soft-close foam-lined drawers with a large enclosed cupboard — all in one unit, all secured with an integral lock, and all finished with the aluminium handles and industrial powder coat quality that run through the full BUNKER modular range. Paired with 500kg-rated stainless steel two-tier racking and pegboard panels with integrated power cable access, the 14-piece combo delivers a complete, professional-grade workshop storage installation in a 1500mm wide footprint that addresses every storage requirement from a single coordinated purchase.

A Floor Cabinet That Combines Drawers and Cupboard Storage.

The floor cabinet at the heart of the 14-piece combo is a dual-format storage unit that brings two fundamentally different storage approaches together in a single installation — seven soft-close foam-lined drawers for organised, tool-specific storage, and a large cupboard space with an adjustable internal shelf for enclosed, flexible storage of the bulkier items, equipment cases, fluids, and workshop supplies that don't suit a drawer. The combination of both formats in a single cabinet means the 14-piece combo addresses the full range of workshop storage requirements at floor cabinet level without requiring two separate units to do it — a more space-efficient and visually cohesive solution than a drawer cabinet and a door cabinet placed side by side.

Seven Soft-Close Foam-Lined Drawers. Properly Specified.

Each of the seven drawers operates on a smooth soft-close mechanism — closing quietly and consistently under any load, a quality of daily operation that distinguishes a well-built cabinet from one that merely functions and reflects the construction standard running throughout the unit. Every drawer is lined with foam that cushions tools against impact, prevents contact damage between adjacent tools, and keeps the contents of each drawer stable and organised through the daily use of an active workshop. Aluminium handles on every drawer provide a corrosion-resistant, premium touch point that maintains its quality alongside the industrial powder coat body across years of professional workshop use. Seven drawers provide enough dedicated storage zones to separate tool categories clearly and maintain an organisation system that holds up through sustained professional use.

Integral Lock. Two Keys. Full Cabinet Security.

The integral lock — supplied with two keys — secures both the drawer bank and the cupboard simultaneously from a single locking point, protecting the full contents of the floor cabinet when the workshop is unattended or shared between users. For a combined drawer and cupboard cabinet that holds a complete professional toolkit alongside valuable workshop supplies, a single integral lock covering the full cabinet is a practical and important security measure that requires no separate padlock or external solution. Two keys supplied from the outset means a spare is immediately available without additional sourcing.

500kg Stainless Steel Racking. Industrial Capacity Overhead.

The two-tier racking carries a 500kg per shelf capacity across stainless steel shelving — a load rating that handles the full weight of power tools, equipment cases, bulk materials, heavy containers, and the most demanding workshop storage loads without structural concern. The stainless steel surface is non-porous, fluid and chemical resistant, and maintenance-free in daily workshop use — a hardwearing overhead shelf surface that wipes clean in seconds and holds its condition through years of sustained professional exposure. At an assembled height of 2,210mm, the two-tier racking utilises the full usable vertical height of the installation — bringing maximum storage capacity to the full wall height above the floor cabinet and making the most of every available millimetre of workshop wall space.

Pegboards with Power Cable Access. Organised and Connected.

The pegboard panels within the 14-piece combo provide customisable tool display and organisation across the vertical surfaces of the installation — hooks, holders, and hangers positioned freely across the full panel surface to keep frequently used tools visible and immediately accessible at the working position without consuming drawer or shelf space. Each pegboard panel features a pre-cut hole for power cable access — routing leads, charger cables, and workshop power connections cleanly through the panel rather than trailing around the outside of the installation, supporting a clean, organised cable management solution integrated directly into the system structure.

Heavy-Duty Steel Throughout. Industrial Powder Coat Finish.

The entire 14-piece combo is constructed from high-quality, heavy-duty steel and finished with an industrial-grade powder coat that protects against scratches, wear, and corrosion across even the most demanding workshop environments. The black finish coordinates naturally across every component of the installation — racking, floor cabinet, pegboards, and hardware — delivering a cohesive, professional workshop aesthetic that reflects the quality of construction throughout. At 165.35kg net assembled, the combo has the substance and solidity of a permanent, professional-grade workshop installation built to remain in active daily service for years without compromise.

1500mm Wide. 2210mm Tall. Built for the Whole Wall.

At W1,500 x H2,210 x D520mm assembled, the 14-piece combo occupies the same generous installation footprint as the 15-piece variant — wide enough to anchor a complete workshop wall, tall enough to utilise the full usable wall height, and deep enough for properly proportioned shelf and cabinet storage. The 14-piece format with its combined drawer-and-cupboard floor cabinet is the natural choice for workshops where a single, self-contained floor unit covering both drawer and enclosed storage is preferred over two separate floor cabinets — a more unified installation in the same 1500mm width.

Key Features:

• Complete 14-piece modular storage combo — 1500mm wide
• 2-tier racking with stainless steel shelving — 500kg capacity per shelf
• Floor cabinet with 7 soft-close foam-lined drawers and large cupboard with adjustable shelf
• Aluminium drawer handles throughout
• Integral lock — 2 keys supplied
• Pegboard panels with pre-cut power cable access holes
• Industrial-grade powder coat finish — scratch, wear and corrosion resistant
• Heavy-duty steel construction throughout
• Assembled dimensions: W 1,500 x H 2,210 x D 520mm
• Available with stainless steel or hardwood shelving
• Black finish
• Net weight: 165.35kg

Specification: Assembled dimensions: W 1,500 x H 2,210 x D 520mm | Shelf capacity: 500kg per shelf | Net weight: 165.35kg | Shelving: Stainless Steel | Colour: Black

Product Code: MS400-C2 14PC S