Portwest Impact F13 Nitrile Foam TPR Waterproof Glove

When your work demands protection against cuts, impacts, water, and heat all at once, most gloves fall short. The Portwest AP54 Impact F13 Nitrile Foam TPR Waterproof Glove is engineered to cover every base — delivering ANSI Cut Level A6, ANSI/ISEA 138 Level 2 impact protection, full waterproof construction, and contact heat resistance in a single, CE certified glove built for the most demanding working environments.

What Makes the Portwest AP54 Different

Level F Cut Resistance — Among the Highest Available

The AP54's fibre construction — combining Nylon, HPPE, and Glass Fibre — achieves EN 388:2016 + A1:2018 Level F cut resistance and ANSI/ISEA 105:2016 Cut Level A6. Level F under EN 388 and A6 under ANSI represent elite-tier cut performance, placing the AP54 among the most cut-resistant mechanical gloves on the market. For workers handling sharp metal, glass, bladed components, or high-tension wire, this level of protection provides a meaningful and certified safety margin.

ANSI/ISEA 138 Level 2 Impact Protection

TPR (Thermoplastic Rubber) impact protection across the dorsal hand, certified to ANSI/ISEA 138:2019 Level 2, shields against medium-energy impacts from knocks, pinches, and crushing forces. The EN 388:2016 "P" designation confirms compliance under the European impact standard as well — giving the AP54 dual-standard impact credentials that meet the requirements of both UK/EU and North American PPE programmes.

Fully Waterproof Construction

The AP54's waterproof construction creates a reliable barrier against water penetration, keeping hands dry in wet weather, during water-adjacent tasks, or when handling wet materials. Unlike gloves that rely solely on coating water resistance, the AP54's waterproof design is built into the glove's structure — ensuring consistent performance throughout the glove's working life, not just when new.

ANSI Abrasion Level 6 — Maximum Durability

Rated at ANSI/ISEA 105:2016 Abrasion Level 6, the highest achievable under that standard, the AP54 resists surface degradation from rough materials, concrete, steel, and abrasive substrates. Combined with the EN 388:2016 Abrasion Level 4 rating, this glove is built to last in high-wear environments where lesser gloves deteriorate rapidly.

Nitrile Foam Coating for Reliable Grip

The nitrile foam palm coating provides excellent grip in both wet and dry conditions, with the oil-resistant and tactile properties that make nitrile foam the coating of choice across heavy industry. Whether handling tools, pipes, components, or structural materials, the AP54 maintains secure grip control without sacrificing dexterity or feel.

Contact Heat Protection to 100°C

Certified to EN 407:2020 (X1XXXX), the AP54 offers contact heat protection up to 100°C — a valuable safety feature for tasks involving warm surfaces, heated equipment, or industrial pipework where incidental thermal contact is a routine risk.

Precision 13-Gauge Liner

The 13-gauge liner delivers a close, accurate fit that reduces hand fatigue and maintains dexterity during extended use. The fine gauge construction provides a secure feel that supports precise grip and control — critical in tasks where an ill-fitting glove becomes a performance or safety liability.

Key Features at a Glance

• EN 388:2016 Level F cut resistance — elite-tier European cut protection
• ANSI/ISEA 105:2016 Cut Level A6 — top-tier US cut standard compliance
• ANSI/ISEA 138:2019 Level 2 — medium-energy impact protection
• Waterproof construction — keeps hands dry in wet environments
• ANSI/ISEA 105:2016 Abrasion Level 6 — maximum abrasion resistance
• ANSI/ISEA 105:2016 Puncture Level 4 — strong puncture resistance
• EN 407:2020 contact heat — protection up to 100°C
• Nitrile foam palm coating — grip in wet and dry conditions
• TPR impact protection — dorsal hand impact defence
• 13-gauge liner — durability and precise fit
• CE certified — EU PPE Regulation compliant

Full Certifications & Standards

Materials

• Nylon — flexibility, structure, and abrasion resistance
• HPPE — high-performance polyethylene for cut resistance
• Glass Fibre — additional cut resistance contributing to Level F performance
• Nitrile Foam — palm coating for grip, oil resistance, and tactile sensitivity

Who Is the Portwest AP54 For?

The AP54 is designed for professionals working in multi-hazard environments where cut severity, impact risk, wet conditions, and heat exposure are all present. Key industries and applications include:

• Oil and gas — offshore and onshore operations
• Construction and civil engineering in wet conditions
• Utilities, water management, and drainage
• Steel fabrication and metal processing
• Mining and quarrying
• Automotive and heavy manufacturing
• Forestry, arboriculture, and outdoor infrastructure
• Any role requiring simultaneous cut, impact, and waterproof hand protection

Frequently Asked Questions

What cut level does the Portwest AP54 achieve? The AP54 achieves EN 388:2016 Level F cut resistance and ANSI/ISEA 105:2016 Cut Level A6 — among the highest cut protection ratings available in a mechanical glove, making it suitable for environments with severe cut hazards.

Is the AP54 fully waterproof? Yes. The AP54 features a waterproof construction that provides a barrier against water penetration, keeping hands dry during wet-weather work or water-adjacent tasks.

What impact protection does the AP54 provide? The AP54 is certified to ANSI/ISEA 138:2019 Level 2 for medium-energy impact protection, with EN 388:2016 "P" impact compliance also confirmed under the European standard.

Does the AP54 protect against heat? Yes. It is certified to EN 407:2020 with contact heat protection up to 100°C, providing a safety margin for tasks involving incidental contact with warm surfaces.

How does the AP54 compare to the A718? Both gloves offer Level 2 impact protection and nitrile foam coating, but the AP54 adds full waterproof construction and significantly higher cut resistance — Level F/A6 versus Level C/A3 on the A718 — making it the better choice for wet environments and more severe cut hazards.

What is the product code for this glove? The Portwest Impact F13 Nitrile Foam TPR Waterproof Glove has product code AP54.

Product Code: AP54 | CE Certified

Always consult your site-specific risk assessment to confirm the appropriate level of hand protection for your application.