Draper Hydraulic Motorcycle Lift, 450kg

The Draper MCL2 is the larger, higher-capacity counterpart to the MCL1 — a professional hydraulic motorcycle lift table built for workshops that regularly service heavyweight motorcycles, large touring bikes, adventure bikes and cruisers that push the limits of a standard-sized lift. With a 450 kg (1,000 lb) rated capacity and a 2,200 x 680 mm working table, it provides 25% more width and 300 mm more length than the MCL1, giving larger machines the platform space they need to sit fully and securely throughout any servicing job.

The full lifting range of 180–815 mm is the broadest in the Draper motorcycle lift table range, and two preset working heights — 550 mm and 740 mm — give the operator a fast, repeatable choice between a mid-height position for wheel and brake work and a full standing-height position for engine, electrical and upper bodywork access. The heavy-duty foot-operated hydraulic pump drives the table smoothly to the chosen height, with a safety table lock engaging to hold it securely against any accidental descent. The 600 x 550 mm loading ramp is proportionally wider than the MCL1's, reflecting the wider wheelbase of the larger bikes this lift is built to handle.

The removable rear panel (690 x 245 mm) provides clean access to the rear wheel without dismounting the bike from the table — essential for tyre changes, rear brake overhauls and chain and sprocket work on bikes heavy enough that repeated table-to-floor transfers add real physical effort and time to every job. At the front, the adjustable wheel clamp and stop bar hold the front wheel firmly regardless of tyre width, keeping the bike stable during fork, brake and headstock servicing.

The stippled table surface grips during loading, and the base-mounted transport wheels allow the lift to be repositioned across a workshop floor before the lockdowns are engaged to hold it solidly in place during use. All-steel construction and a 138 kg working weight signal the MCL2's intent as permanent workshop infrastructure rather than occasional-use equipment. Manufactured to the EN1494 standard and supplied in a wooden crate, it arrives ready to install as the anchor piece of a professional motorcycle servicing bay.

Key feature

• 450 kg (1,000 lb) capacity — handles heavyweight touring bikes, adventure bikes, cruisers and large road bikes
• 2,200 x 680 mm all-steel working table — 300 mm longer and 150 mm wider than the MCL1 for larger machines
• Two preset working heights at 550 mm and 740 mm — fast, repeatable positioning for different servicing tasks
• Full 180–815 mm lifting range — the broadest range of any Draper motorcycle lift table
• Removable rear panel (690 x 245 mm) — rear wheel access for tyre changes and brake work without removing the bike
• Adjustable front wheel clamp and stop bar — secures a wide range of front tyre widths firmly on the table
• Safety table lock — prevents accidental descent at any working height
• 600 x 550 mm loading ramp — wider proportionally than the MCL1 to match larger wheelbases
• Stippled table surface — grip and traction when loading motorcycles up the ramp
• Transport wheels with lockdowns — reposition freely, lock solid during use
• All-steel construction, 138 kg — permanent workshop-grade installation piece
• EN1494 certified, supplied in wooden crate