Draper Contractors Saw, 315mm, 2000W

The Draper CTS315A is a serious contractor's table saw built for users who need workshop-grade ripping and crosscutting performance with the practical ability to move the machine between locations. Powerful, well-equipped, and genuinely portable for its size, it's the table saw for tradespeople and serious hobbyists who won't compromise on cutting capacity.

A 2000W motor drives the 315mm blade at 2950rpm, delivering confident cutting performance through hardwood, softwood, sheet materials, and man-made boards. With a maximum depth of cut of 85mm at 90° and 46mm at 45°, the CTS315A handles full-thickness structural timber, thick hardwood slabs, and deep ripping cuts that would be beyond the reach of smaller site saws. The rise and fall tilt blade adjusts to both depth of cut and bevel angle, giving you full control over the cut geometry for every job.

The front locking rip fence is the feature that defines table saw accuracy — a fence that locks true and stays put under load is the difference between parts that fit and parts that don't. Combined with the supplied mitre guide, the CTS315A covers the full range of ripping, crosscutting, and angled cuts with confidence and repeatability.

The main work table measures a substantial 800 x 550mm, and the large extension table — mountable to either the side or the rear of the saw — extends the overall table length to 1600mm, providing the full support needed for long rip cuts through sheet material or lengthy boards without the workpiece tipping or twisting at the end of the cut.

Despite weighing 54kg, the CTS315A is designed to move. The large rear wheels allow the saw to be tilted and rolled between locations — workshop to van, site to site — without needing to dismantle or lift the machine. The no-volt switch prevents unexpected restarts after a power interruption, and the dust extraction hose connects to a workshop extractor to keep the working environment clean and safe.

Supplied complete with a 40T TCT blade, mitre guide, dust extraction hose, push stick, and moulded cable with approved plug — ready to rip straight out of the box.

Key Features:

• 2000W motor, 315mm blade at 2950rpm
• 85mm max depth of cut at 90°, 46mm at 45°
• Front locking rip fence for accurate, repeatable ripping
• Rise and fall tilt blade — adjustable depth and bevel angle
• 800 x 550mm main work table
• Large extension table (800 x 400mm) — fits side or rear, extends total length to 1600mm
• Large rear wheels for easy transport between workshop and site
• Dust extraction hose included
• No-volt switch for safe operation
• 30mm bore, supplied with 40T TCT blade
• Supplied with mitre guide and push stick
• Moulded cable and approved plug — ready to use

Specifications:

In the Box:

• Contractor's table saw
• 40T TCT blade (fitted)
• Front locking rip fence
• Extension table
• Mitre guide
• Dust extraction hose
• Push stick
• Moulded cable and approved plug