Draper MMA Inverter Welder with TIG-Lift Dti, 200A

Dual-Function MMA and TIG-Lift Welding in One Compact, Portable Machine

The Draper AW200A is a 200A dual-function inverter welder that combines MMA (stick) and TIG-Lift capability in a single compact, portable package. Built into a hard case with an integrated carry handle and packed with smart welding aids — hot start, arc force, anti-stick, and VRD safety function — it's a serious choice for fabricators, tradespeople, and skilled DIY users who want the flexibility of two welding processes without the cost or bulk of two separate machines.

Two Welding Processes, One Machine

The standout feature of the AW200A is its dual-function MMA/TIG-Lift capability. MMA (stick) welding handles structural, fabrication, and repair work — including outdoor and breezy conditions where flux-coated electrodes shrug off the wind that would defeat gas-shielded processes. TIG-Lift brings precision welding to the same machine: ideal for cleaner, more controlled welds on thinner materials, exhaust work, decorative fabrications, and applications where weld appearance and heat control matter. Switching between processes lets you pick the right tool for each part of a job without changing machines.

Smart Welding Aids for Easier, Cleaner Welds

The AW200A is fitted with a comprehensive suite of features that help deliver excellent ignition and a reliable, smooth, stable arc:

Hot Start delivers a brief boost of current at the moment the arc strikes, helping the electrode ignite cleanly and consistently — particularly valuable on cold-start welds or when working with more demanding rods. Arc Force automatically increases current if the arc shortens or threatens to stall, helping to prevent the electrode from sticking to the workpiece during the weld. Anti-Stick reduces current if the electrode does stick, helping to prevent it from glowing red and ruining the rod. Together, these features take much of the frustration out of stick welding while improving overall weld quality.

VRD Function for Added Operator Safety

A particularly worthwhile feature on the AW200A is its VRD (Voltage Reduction Device) function. VRD reduces the open-circuit voltage at the electrode when the welder is not actively welding, significantly improving operator safety — especially in damp, humid, or otherwise hazardous environments such as outdoor sites, agricultural settings, or marine work. VRD is increasingly considered best practice for stick welding in challenging conditions, and its inclusion here is a strong nod to the AW200A being designed as a serious working tool rather than an entry-level machine.

DTI for Confident, Connected Welding

The AW200A includes DTI (Digital Total Inverter) technology, supporting precise, consistent control of welding parameters. Combined with the inverter design, this contributes to the smooth, stable arc behaviour that makes the welder pleasant to use across both MMA and TIG-Lift modes.

20–200A Amperage Range

The welder offers a wide amperage range of 20–200A, giving you the flexibility to weld a broad spread of materials and thicknesses. The lower end of the range opens up thinner sheet work where heat control matters most — particularly relevant in TIG-Lift mode — while 200A at the top gives you genuine output for thicker steel and more demanding fabrication tasks. The 60% duty cycle at the full 200A — and 100% duty cycle at 160A — means the AW200A is well-suited to sustained workshop use, not just intermittent bursts.

Portable Hard Case Design

The AW200A is built into a hard case with an integrated carry handle, making it genuinely portable. At just 5.3kg and measuring 340 x 135 x 235mm, it's light enough to carry up a ladder, across a site, or into a vehicle for mobile work. The hard case construction also helps protect the welder during transport — a worthwhile detail for mobile fabricators and on-site workers who routinely move equipment between locations.

Fan Cooling and Thermal Overload Protection

Active fan cooling helps the welder shed heat during sustained use, supporting its strong duty cycle figures. Thermal overload protection adds a further layer of reliability: if the internal temperature rises too high, the welder will protect itself automatically, helping to extend its working life and prevent damage from over-extended sessions.

Heavy-Duty Dinse-Type 35/50 Connectors

The welder uses Dinse-type 35/50 couplings for the welding leads — a step up from the smaller 10/25 connectors found on lower-output machines. The 35/50 fittings are rated for higher current and are the standard for serious workshop welders, ensuring compatibility with heavier-duty electrode holders, earth clamps, TIG torches, and accessories.

Important: 32A Plug Required

A note for prospective buyers: the AW200A is supplied without a plug fitted and requires a 32A plug for installation. This is a typical requirement for higher-output welders running on 230V supply and ensures the machine can draw the current it needs to deliver full performance. You'll need to factor in a suitable supply and plug as part of your setup.

Key Features at a Glance

• Dual-function MMA and TIG-Lift inverter welder
• Amperage range: 20–200A
• VRD function for added operator safety in damp or hazardous conditions
• DTI (Digital Total Inverter) technology
• Hot start for clean, consistent arc ignition
• Arc force to help prevent electrode stalling
• Anti-stick to protect electrodes if they stick to the workpiece
• Fan cooled for sustained operation
• Thermal overload protection
• Strong duty cycle: 60% @ 200A / 100% @ 160A
• Heavy-duty Dinse-type 35/50 connectors
• Lightweight at just 5.3kg in a portable hard case
• Integrated carry handle for portability
• 230V power supply (32A plug required, not supplied)

Full Specification

Ideal Applications

The Draper AW200A is well-suited to general and structural fabrication work, gate, fence, and ornamental metalwork, vehicle and trailer repair, exhaust and bodywork fabrication (using TIG-Lift for cleaner welds on thinner steel), agricultural and farm machinery maintenance, on-site welding in damp or hazardous conditions (where VRD really earns its keep), and serious DIY fabrication projects. The dual MMA/TIG-Lift capability makes it especially attractive for users who handle a mix of heavier structural work and finer, more precise welding — without needing to invest in two separate machines.

Backed by the trusted Draper Tools name, the AW200A combines dual-process versatility, modern welding aids, VRD safety, and genuine portability in one well-equipped inverter welder — a strong choice for any user who wants real welding capability across both stick and TIG-Lift processes in a single compact package.