Draper Expert 12V Recovery Winch, 1814kg

When greater pulling capacity is what the job demands, the Draper Expert RW/12V-1814KGS steps up with a substantial 1,814kg pulling capacity and a 1,200W high-power DC motor — delivering significantly more capability than the entry-level RW/12V-1134KGS while sharing the same proven all-steel, all-weather construction and remote control operation that makes the Draper Expert winch range a trusted choice for vehicle recovery and heavy load handling.

Designed for permanent mounting on vehicles or trailer beds, the RW/12V-1814KGS connects directly to a standard 12V vehicle electrical system and is ready to work in all weathers without compromise. The all-steel fabrication resists corrosion and physical damage across long service life, making it equally suited to agricultural machinery, commercial site vehicles, 4x4 recovery builds, and expedition-spec trucks that operate in demanding outdoor environments year-round.

The 1,200W motor delivers first-class pulling performance through an integrated gear-train that smooths out the load on the drivetrain, reduces operating noise, and extends the working life of both motor and gearing significantly compared to direct-drive alternatives. For a winch that may need to perform reliably in high-pressure recovery situations, this durability is not a marginal concern — it's essential.

Operator safety is built into the design through the remote control unit, which can be handheld during the pull or mounted to the vehicle for fixed-position use. Either way, the operator stays at a safe working distance from the wire rope and load at all times — a non-negotiable requirement when working with a tensioned cable under load approaching 2 tonnes.

The 15-metre, 5.5mm diameter wire rope is guided through a 4-way roller fairlead that distributes the cable evenly across the drum regardless of pull angle, preventing line kinking and reducing wear on rope and drum across the full working length.

Key Features:

• 1,814kg pulling capacity for demanding vehicle and load recovery
• 1,200W high-power DC motor — 70% more powerful than the 1134kg model
• All-steel all-weather construction for permanent vehicle or trailer mounting
• Integrated gear-train for smooth, quiet operation and extended working life
• Remote control unit — handheld or vehicle-mounted for safe distance operation
• 15m wire rope fed through 4-way roller fairlead for smooth, even cable distribution
• 5.5mm diameter wire rope for increased strength over the entry-level model
• 12V DC power supply — compatible with standard vehicle electrics
• Overall dimensions: 406 x 294 x 186mm
• Weight: 11.15kg
• Product Code: RW/12V-1814KGS

Specifications:

How Does the RW/12V-1814KGS Compare to the RW/12V-1134KGS?

For buyers choosing between the two Draper Expert 12V recovery winches, the key differences are straightforward:

The RW/12V-1814KGS is the stronger choice for heavier vehicles, larger trailers, or any application where maximum pulling capacity is a priority. The RW/12V-1134KGS remains a capable and cost-effective option for lighter recovery duties on smaller vehicles.

Ideal For: Off-road and 4x4 vehicle recovery, agricultural and forestry operations, expedition and overland vehicles, commercial site and construction trucks, trailer-mounted load handling, boat launching and retrieval, and any application where a permanently mounted 12V winch with near 2-tonne pulling capacity is required.

Q: What is the difference between the Draper RW/12V-1814KGS and RW/12V-1134KGS recovery winches? A: The RW/12V-1814KGS offers a higher 1,814kg pulling capacity versus 1,134kg on the smaller model, and is powered by a 1,200W motor compared to 700W. It also uses a heavier 5.5mm diameter wire rope and a slightly longer 15m cable. Both models share the same all-steel construction, gear-train, 4-way roller fairlead, and remote control operation.

Q: What vehicles is the Draper RW/12V-1814KGS winch suitable for? A: The RW/12V-1814KGS is designed for mounting on any vehicle or trailer bed with a 12V DC electrical system. Its 1,814kg capacity makes it particularly well suited to heavier 4x4s, SUVs, trucks, commercial vehicles, and agricultural trailers where a higher-capacity winch is required.

Q: Is the Draper RW/12V-1814KGS suitable for off-road recovery use? A: Yes. The all-steel all-weather construction, remote control operation, 4-way roller fairlead, and 1,814kg pulling capacity make the RW/12V-1814KGS well suited to off-road and 4x4 recovery builds where a reliable, permanently mounted electric winch is required.

Q: How much more powerful is the 1814kg winch compared to the 1134kg model? A: The RW/12V-1814KGS uses a 1,200W motor — approximately 70% more powerful than the 700W motor in the RW/12V-1134KGS — delivering significantly greater pulling force for heavier vehicles and more demanding recovery scenarios.

Q: Does the Draper RW/12V-1814KGS come with wire rope and remote control? A: Yes. The RW/12V-1814KGS is supplied with 15 metres of 5.5mm diameter wire rope and a remote control unit that can be handheld during operation or mounted to the vehicle for fixed-position control.