Draper Expert Trim Removal Kit (12 Piece)

The Draper Expert ITK-2 Trim Removal Kit delivers a complete 12-piece professional solution for the safe removal and manipulation of interior trim panels across the automotive, marine, and aviation industries. Whether you are removing a door card to access window regulator components, pulling a dashboard fascia for infotainment system installation, detaching trim strips during a vehicle respray, or working on cabin interior panels in a boat or aircraft, the ITK-2 gives you the right tool for every stage of the job — without leaving a mark on the surfaces that matter.

Trim removal is one of those workshop tasks that looks deceptively simple but carries a real risk of expensive damage when approached with the wrong tools. Using a standard flat-blade screwdriver or a metal pry bar to lever off trim clips and panels almost inevitably results in scratched paint, cracked plastic fascias, gouged door cards, or broken retaining clips — all of which add cost, time, and frustration to what should be a straightforward procedure. The ITK-2 exists precisely to eliminate that risk.

Non-Marking Nylon Construction Throughout

Every one of the 12 tools in the ITK-2 kit is manufactured from special non-marking nylon — a material carefully selected for its combination of strength, flexibility, and surface safety. Nylon tools generate no scratches on painted surfaces, no scuff marks on plastic trims, and no gouges on delicate fascia materials, even when significant leverage is applied. This makes the ITK-2 equally suitable for use on new vehicles where finish preservation is paramount, on classic or collector cars where original interior trim is irreplaceable, and in professional detailing or installation environments where a flawless result is non-negotiable.

The nylon construction also provides a degree of flex that rigid metal tools cannot match — allowing the tools to follow the contours of trim panels and work into tight gaps without applying concentrated point loads that could crack or deform plastic components.

12 Specialist Tools, Every Application Covered

The real value of the ITK-2 lies in the fact that it is not a set of 12 identical pry tools — it is a set of 12 purpose-designed instruments, each with a specific profile, blade shape, or hook geometry tailored to a particular trim removal or manipulation task. Different tools within the set address different clip types, different panel thicknesses, different access angles, and different levels of leverage requirement.

This means that rather than improvising with a single generic tool across every step of a trim removal job, the professional technician or skilled enthusiast can select the most appropriate instrument for each specific task — producing cleaner results, preserving clip integrity, and completing the job more quickly.

The variety of profiles within the kit typically covers:

• Flat and tapered pry tools for initial panel gap entry
• Angled levers for working around clip positions
• Hook-profile tools for pulling clips and retaining features
• Wide-blade tools for distributing load across larger panel sections
• Narrow-profile tools for accessing tight or restricted trim locations

Multi-Industry Versatility

While trim removal kits are most commonly associated with automotive workshop use, the Draper Expert ITK-2 is explicitly designed for application across three distinct industries:

Automotive — The primary application. Door cards, dashboard fascias, centre console trims, headlining, A, B, and C pillar trims, sill covers, boot liners, gear surround panels, and all other interior plastic and fabric-covered trim components. Essential for car audio installation, CCTV and dash cam fitting, window tinting, paint protection film application, upholstery work, and general interior repair and refurbishment.

Marine — Boat cabin interiors present their own trim removal challenges, with panels often constructed from materials including teak veneer, GRP-backed laminates, and specialist marine-grade plastics. The non-marking nylon tools of the ITK-2 are equally at home in this environment, protecting expensive marine interior finishes whilst allowing access for wiring, plumbing, and equipment installation work.

Aviation — Aircraft interior panels and trim components are manufactured to exacting standards and are subject to strict airworthiness requirements. Non-marking, non-metallic trim tools are essential in this environment to avoid surface damage and prevent contamination of sensitive components. The ITK-2's nylon construction makes it appropriate for use in light aviation and general aviation cabin interior maintenance.

Heavy Duty Canvas Tool Roll

Keeping 12 individual trim tools organised and readily accessible is addressed by the high-quality heavy-duty canvas compartment tool roll in which the ITK-2 is supplied. Each tool sits in its own dedicated compartment within the roll, preventing the tools from rubbing against one another, making it immediately apparent if any component is missing, and allowing the entire kit to be picked up and moved in a single action.

The hook and loop fixing secures the roll tightly when closed and allows it to be opened quickly and laid flat for full tool access during use. The canvas construction is robust enough to withstand the rigours of a professional workshop environment — resistant to the oils, solvents, and general grime that accumulate in busy workspaces — whilst remaining compact and lightweight enough to be stored in a toolbox drawer or carried in a technician's bag.

For mobile technicians, vehicle inspectors, and installers who work across multiple locations, the tool roll format is particularly valuable — the entire kit travels as a single organised unit rather than a collection of individual items loose in a bag.

Draper Expert Standard

As with all products in the Draper Expert range, the ITK-2 represents Draper's commitment to professional-grade quality, precision manufacture, and reliable performance under workshop conditions. The Expert range is designed for users who depend on their tools day in, day out and need confidence that the kit will perform consistently over a long service life.

Key Features:

• 12-piece professional trim removal and manipulation kit
• All tools manufactured from special non-marking nylon — no scratches, scuffs, or surface damage
• Specifically designed for automotive, marine, and aviation interior trim applications
• Covers door panels, dashboard fascias, trim strips, and all similar interior trim removal tasks
• 12 purpose-designed tool profiles — each tailored to specific trim removal requirements
• Supplied in heavy-duty canvas compartment tool roll with hook and loop fixing
• All tools individually pocketed for organisation, protection, and easy inventory
• Draper Expert professional grade quality
• Product Code: ITK-2
• Brand: Draper Expert

Suitable For: Automotive interior trim removal and installation, car audio and infotainment fitting, dash cam and CCTV installation, paint protection film and window tinting preparation, classic and collector car restoration, boat cabin interior panel removal, light aviation interior maintenance, vehicle upholstery and interior refurbishment. Ideal for professional automotive technicians, trim specialists, vehicle audio installers, detailers, marine engineers, and experienced home mechanics.