Draper Biscuit Jointer, 900W

Achieve strong, precise, and perfectly aligned timber joints with the Draper PT8100D Biscuit Jointer — a capable and well-specified jointing tool designed for furniture makers, joiners, kitchen fitters, and serious woodworking enthusiasts. Delivering 900W of cutting power at 11,000rpm, the PT8100D makes light work of cutting clean, accurate slots for biscuit jointing across a wide range of timber and board materials.

The PT8100D's adjustable fence offers angle adjustment from 0° to 90°, allowing you to cut precise slots for both flat and angled joints — ideal for everything from straightforward butt joints and edge-to-edge panel glue-ups to mitre joints and angled frame construction. Cutting depth is fully adjustable from 0 to 20mm, giving you the flexibility to accommodate different biscuit sizes and joint requirements with ease.

A spindle lock makes blade changes quick and straightforward, while the fixed guard ensures safe, consistent operation throughout. Dust management is handled by the supplied dust bag, keeping your workspace cleaner during extended jointing sessions.

The PT8100D comes comprehensively equipped straight from the box — a TCT blade, dust bag, and a generously long 2.5m cable with BS plug are all included, as is a carry case for safe storage and transport between job sites or workshop sessions. At just 3.2kg, it's comfortable to handle and manoeuvre for extended periods, making it as practical on site as it is in the workshop.

Key Features

• 900W motor running at 11,000rpm for clean, fast slot cutting
• Adjustable fence with 0°–90° angle adjustment for flat and angled joints
• Cutting depth adjustable from 0–20mm to suit all standard biscuit sizes
• Spindle lock for quick, safe blade changes
• Fixed guard for consistent operator protection during use
• Supplied with TCT blade, dust bag, carry case and 2.5m cable with BS plug
• Lightweight at just 3.2kg for comfortable extended use
• 240V mains powered with UK BS plug fitted

Specifications

FAQ Section

What biscuit sizes is the Draper PT8100D compatible with?
The PT8100D's cutting depth is adjustable from 0 to 20mm, making it compatible with all standard biscuit sizes including No.0, No.10, and No.20. The adjustable fence and depth stop allow you to set the precise slot position for each biscuit size with confidence.

What angle range does the fence adjust to?
The adjustable fence pivots from 0° to 90°, covering the full range of common jointing angles. This makes the PT8100D equally capable for standard flat butt joints and edge glue-ups as it is for mitre and angled frame joints.

Does the PT8100D come with a carry case?
Yes. The PT8100D is supplied in a carry case for safe storage and easy transport between the workshop and job site, along with a TCT blade, dust bag, and a 2.5m cable with BS plug fitted.

What does the spindle lock do?
The spindle lock holds the blade spindle stationary during blade changes, allowing you to loosen and tighten the blade fixing safely and without the need for a second tool to counter-hold the spindle.

What is the blade size on the PT8100D?
The PT8100D uses a 100mm TCT (tungsten carbide tipped) blade, which is the standard size for biscuit jointers in this class. A TCT blade is supplied as standard and offers excellent durability and clean cutting performance across a wide range of timber and board materials.

Is the PT8100D suitable for site use?
Yes. At 3.2kg with a 2.5m cable and supplied carry case, the PT8100D is well suited to both workshop and on-site use. The fitted BS plug is ready to use with standard UK mains sockets straight from the box.

What materials can the PT8100D cut slots in?
The PT8100D is designed primarily for use in timber, MDF, plywood, and chipboard — covering the full range of materials commonly encountered in furniture making, cabinet installation, kitchen fitting, and general joinery.