Bunker Workbench with Drawer, 1829mm

Worktop. Shelf. Secure drawer. Everything a working bench should be.

The Bunker Workbench with Drawer at 1829mm is a complete, all-in-one workshop bench solution — a generously proportioned primary workbench that combines a heavy-duty 295kg-rated worktop, a full-length storage shelf, and a secure locking drawer into a single, robust, industrial-grade unit. For workshops and garages where organisation matters as much as working capacity, this is the bench that keeps everything in its place, keeps valuable tools under lock and key, and handles serious work without flinching.

295kg. Serious Capacity for Serious Work.

The worktop of the Bunker 1829mm Drawer Workbench is rated to a 295kg static load — a specification that puts it firmly in the professional category and well beyond the capacity of most workshop benches at this size. Engine blocks, gearboxes, heavy fabrications, and the full weight of demanding mechanical and engineering work sit on this worktop without concern. The lower storage shelf matches that capacity at 295kg, providing a structural lower tier for heavy components, equipment cases, and workshop supplies that need to be kept off the worktop and within arm's reach. At 1829mm wide and 787mm deep, the working footprint is one of the most generous in the BUNKER range — a full-width professional bench with the depth to work comfortably without feeling cramped against the back edge.

A Locking Drawer That Earns Its Place

Beneath the worktop, a secure locking drawer provides protected storage for the tools and equipment that matter most — measuring instruments, specialist bits, expensive hand tools, and anything that shouldn't be left accessible in a shared workshop or unattended garage. The drawer locks independently, keeping valuables secured without requiring the entire bench to be locked down. With a static capacity of 25kg, it handles a meaningful load of quality tools rather than just a handful of small items. For workshops where multiple people work at the same bench, or where the garage isn't always secured, a built-in locking drawer is a practical security feature that a standard open-shelf bench simply can't offer.

Industrial Finish. Built to Last.

The entire unit is protected by an industrial-grade matt-textured powder coating — a surface treatment specified for the realities of professional workshop environments rather than occasional domestic use. Matt-textured powder coating provides superior resistance to scratches, surface wear, and corrosion compared to standard paint finishes, maintaining the protective integrity and appearance of the steel through the daily punishment of an active workshop. At 71.7kg, this is a bench of genuine substance and solidity — heavy enough that it stays put during vigorous working, and well-built enough that it will still be in daily active service long after lesser benches have been replaced. Adjustable feet compensate for uneven or imperfect floor surfaces, bringing the bench to a stable, level working position on whatever it stands on.

Delivered on a Pallet. Built for Two.

The Bunker 1829mm Workbench with Drawer is delivered on a pallet — reflecting the quality and weight of its construction. At 71.7kg, two people are required to position and install the bench safely. It's a worthwhile consideration to plan for on delivery day, and a clear signal of the substantial, professional-grade build that justifies the weight.

A Complete Workshop Anchor

Without the complexity of integrated power or the specialist function of the teardown variant, the Bunker 1829mm Drawer Workbench is a clean, purposeful, all-in-one workshop solution — a primary bench that handles the full range of professional workshop tasks from a single, well-specified unit. It pairs naturally with the wider BUNKER workshop and storage range: the Load-Up Stacking System for portable tool organisation, BUNKER van vault products for vehicle security, and the power pegboard workbench variants for dedicated powered workstations alongside the primary bench. A BUNKER workshop built around this bench is organised, capable, and ready for whatever the working day demands.

Key Features:

• 1829mm wide all-in-one professional workbench
• 295kg worktop static load capacity
• 295kg lower shelf static load capacity
• Secure locking drawer — 25kg static capacity
• Industrial-grade matt-textured powder coat finish — scratch, wear and corrosion resistant
• Adjustable feet for stability on uneven surfaces
• Heavy-duty steel construction throughout
• Delivered on pallet — requires two people to install
• Weight: 71.7kg

Specification: Dimensions: W 1,829 x H 914 x D 787mm | Weight: 71.7kg | Worktop capacity: 295kg | Shelf capacity: 295kg | Drawer capacity: 25kg (static)

Product Code: B300-WB72D