Bunker 3 Tier Trolley with Pull Handle, 714mm

Every tool within reach. Exactly where you left it.

The Bunker 3 Tier Trolley with Pull Handle at 714mm is a compact, well-specified mobile tool organisation unit built for workshops, garages, and service environments where having the right tool immediately accessible at the working position — without returning to the bench or cabinet — makes a direct difference to working pace and efficiency. Three EVA foam-lined shelves with retaining lips, a three-position adjustable middle shelf, braked castors, and side bumpers combine in a lightweight 20.9kg unit that moves freely around the workshop and stays put when it counts. The base model of the BUNKER 3 tier trolley range — clean, practical, and ready to add a hardwood or stainless steel worktop when the workflow demands one.

Three Shelves. EVA Foam. Nothing Moves. Nothing Scratches.

Each of the three storage shelves is lined throughout with EVA foam — dense, resilient, and specifically suited to protecting the precision instruments, finished tools, and sensitive equipment that a professional workshop trolley carries through daily movement between working positions. The EVA lining cushions tools against the impact and vibration of transit across workshop floors, prevents the surface scratches that bare tray contact causes on polished and precision tools, and keeps the contents of each shelf stable and organised in the configuration loaded rather than sliding freely under movement. Retaining lips around the frame of every shelf level add all-round containment — keeping small sockets, adaptors, drill bits, and components on the shelf where they were placed rather than migrating to the edge and falling during movement or when the trolley is parked on a slightly uneven floor.

Three-Position Adjustable Middle Shelf.

The middle shelf adjusts to three different heights — a specific and practical flexibility that accommodates tools of varying sizes across the full range of workshop tasks the trolley is put to. Where many mobile trolleys offer a simple high or low adjustment, the three-position format provides a middle option that suits the broad range of tool sizes that sit between the two extremes — giving the toolkit a proper fit across the trolley layout rather than a forced compromise between positions that are either too close or too far apart. For professionals who use the trolley across different jobs and carry a varied toolkit from session to session, three height positions make the middle shelf genuinely adaptable rather than theoretically flexible.

Side Bumpers on All Corners of the Bottom Tray.

Side bumpers are fitted to all corners of the bottom tray — providing all-round impact protection at the lowest and most vulnerable point of the trolley during movement through workshop spaces, around vehicles, and alongside other equipment. The bottom tray corners are the first point of contact when the trolley is manoeuvred into tight working positions or turned in confined areas, and fitting bumpers at all four corners rather than just the sides provides complete perimeter protection against the minor but cumulative impact damage that an unprotected steel trolley accumulates over daily professional use. It is a considered protective detail that reflects the working environment the Bunker trolley is designed for.

The Lightweight Base Model. Ready to Expand.

At 20.9kg — notably lighter than the 32.8kg hardwood and 34.55kg stainless steel worktop variants — the base trolley is the most portable and manoeuvrable unit in the BUNKER 3 tier trolley range, and the natural starting point for those who want the EVA foam shelf organisation and retaining lip protection without the integrated worktop. For workshops where a separate workbench or the top of a roller cabinet provides the primary working surface, the base trolley is the pure storage and tool organisation solution — three properly protected, properly retained storage tiers that follow the work around the workshop without the weight of a worktop overhead.

The BUNKER hardwood worktop (B400-3TCRWOOD) and stainless steel worktop (B400-3TCR/SS) are available separately, allowing the trolley to be upgraded to a full mobile workstation when the workflow demands it — or kept as a dedicated storage unit when it doesn't.

Strong Handle. Braked Castors. Smooth and Stable.

A strong steel pull handle provides a comfortable grip for moving the trolley between vehicle bays, service positions, and workshop areas. Four hardwearing castor wheels deliver smooth mobility across workshop floors, and two braked castors lock the trolley firmly in place during active use — preventing the drift and movement that makes an unbraked mobile storage unit frustrating to work alongside. At 714mm wide and 851mm tall, the trolley is well proportioned for a single-person working position and compact enough to navigate around vehicles and workshop equipment without difficulty.

Key Features:

• 714mm wide 3-tier modular tool trolley
• Three EVA foam-lined shelves — 50kg capacity per shelf
• Retaining lips around the frame of every shelf level
• Middle shelf adjustable to three different heights
• Side bumpers on all four corners of the bottom tray
• Strong steel pull handle for controlled movement
• 4 hardwearing castor wheels — 2 with brakes for stationary stability
• Compatible with BUNKER hardwood worktop (B400-3TCRWOOD) and stainless steel worktop (B400-3TCR/SS)
• Weight: 20.9kg

Specification: Dimensions: W 714 x H 851 x D 410mm | Weight: 20.9kg | Shelf capacity: 50kg per shelf

Product Code: B400-3TCR