Lithium Cabinet 23-LC Justrite lithium-ion cabinet
Advanced 9-Layer ChargeGuard™ Protection for Safe Lithium Battery Charging and Storage
Protect your facility, equipment, and personnel with the Justrite 23-LC Lithium-Ion Battery Charging Safety Cabinet—a purpose-built solution engineered to address the growing fire risks associated with lithium battery charging and storage. Featuring Justrite's proprietary 9-layer ChargeGuard™ system, this cabinet significantly reduces the risk of fire, smoke, and explosions caused by lithium battery thermal runaway events.
As lithium-ion battery use accelerates across industries, so does the need for certified, science-backed containment. The 23-LC delivers exactly that—combining intelligent engineering, premium materials, and multi-layered defence to keep your workplace safe.
Why Lithium-Ion Battery Charging Demands Specialised Containment
Lithium-ion batteries can fail catastrophically during charging. Thermal runaway events release intense heat, toxic gases, and explosive force—threatening lives, damaging property, and triggering devastating facility fires. Standard storage cabinets simply aren't designed to contain these hazards.
The Justrite 23-LC is built from the ground up to contain, dampen, filter, and seal—mitigating every dimension of a lithium battery failure.
The 9-Layer ChargeGuard™ Defence System
The 23-LC's proprietary ChargeGuard™ technology delivers comprehensive multi-stage protection through engineered safety features that work in concert during a battery failure event.
Welded Double-Wall Steel Construction
The cabinet's welded double-wall steel body provides a solid, structurally reinforced enclosure designed to contain potential explosions. An integrated air gap between walls helps maintain a safe-to-touch outer shell temperature even during internal thermal events.
Pressure Relief Vent System
Vented door panels are engineered to dampen the explosive force generated by thermal runaway and battery failure—directing energy safely while maintaining structural integrity.
Heat-Activated Expanding Door Seals
Intumescent door seals swell automatically as temperatures rise, sealing the door frame to prevent smoke, fumes, and flames from escaping during a fire event.
Spring-Loaded Automatic Dampers
Damper flaps close automatically when internal cabinet temperatures reach 135°F (57°C), reducing the release of harmful smoke and gases by as much as 99%—protecting workers and limiting facility contamination.
Door Hinge Flame Guards
Tight-sealing door hinges fitted with dedicated flame guards prevent fires from escaping through hinge gaps, eliminating secondary fire ignition points outside the cabinet.
Reinforced Steel Door Latch Plates
Heavy-duty steel latch rods paired with reinforced latch cradle plates ensure cabinet doors remain securely closed during pressure events, maintaining containment when it matters most.
Toxin Filtration System
An integrated filtration system absorbs and filters toxic compounds emitted from lithium-ion battery fires, reducing environmental contamination and protecting personnel.
Colour-Changing Temperature Indicator Tabs
Visual indicator tabs change colour to signal when the cabinet exterior has been exposed to elevated temperatures—providing at-a-glance status verification for safety teams.
Key Features at a Glance
- Proprietary 9-layer ChargeGuard™ safety system
- Welded double-wall steel construction with air gap insulation
- Pressure relief vent system to dampen explosive force
- Intumescent heat-activated door seals that expand with rising temperatures
- Spring-loaded automatic dampers activating at 135°F to block 99% of smoke/gases
- Door hinge flame guards preventing secondary fires
- Reinforced steel door latch plates for guaranteed containment
- Stainless steel flame arrestor material
- Toxin filtration and absorption system
- Safe-to-touch outer shell with colour-changing temperature indicators
- Fully welded edges for maximum structural integrity
Product Specifications
Specification | Detail |
Model | Justrite 23-LC |
Material | Steel (welded double-wall construction) |
Edges | Fully Welded |
Manufacturing Process | Welding |
Flame Arrestor Material | Stainless Steel |
Damper Activation Temperature | 135°F (57°C) |
Operating Voltage | 110 – 220V |
Maximum Voltage | 110 – 220V |
Recommended Voltage | 110 – 220V |
High Hazard Seismic Zone Rated | No |
Safety System | 9-Layer ChargeGuard™ |
Ideal Applications
The Justrite 23-LC Lithium-Ion Battery Charging Safety Cabinet is essential for facilities that charge or store lithium batteries, including:
- Warehouses and distribution centres operating electric forklifts and material handling equipment
- E-mobility businesses (e-bikes, e-scooters, electric vehicles)
- Manufacturing facilities using cordless power tools
- Emergency services and first responder equipment storage
- Telecommunications and data centre backup systems
- Research and development laboratories
- Battery retailers and distributors
- Drone and robotics operations
- Maintenance and repair workshops
Active Charging Protection You Can Trust
Unlike passive storage cabinets, the 23-LC is specifically engineered for active charging operations—where the risk of thermal runaway is highest. With an operating voltage range of 110–220V, the cabinet accommodates a wide variety of charging equipment and battery types, allowing safe, controlled charging within a certified containment enclosure.
Why Choose Justrite?
For decades, Justrite has set the global standard in workplace safety storage. The 23-LC continues this legacy by addressing one of today's most pressing industrial safety challenges with engineering that goes beyond standard cabinet construction—integrating containment, ventilation, sealing, filtration, and visual monitoring into a single comprehensive solution.
Order the Justrite 23-LC Today
Don't wait for a lithium battery incident to expose gaps in your safety strategy. Equip your facility with the certified containment performance of the Justrite 23-LC Lithium-Ion Battery Charging Safety Cabinet—the proven solution for safer lithium battery operations.
Contact us today to place your order, request a quotation, or speak with a lithium battery safety specialist about your facility's specific requirements.
Need guidance on capacity planning, electrical configuration, or integrating the 23-LC into your existing safety infrastructure? Our team is ready to help you build a comprehensive lithium-ion safety programme tailored to your operation.
Justrite’s Lithium-Ion battery Charging Safety Cabinet is designed for the safe charging and storage of lithium batteries. It features a proprietary 9-layer ChargeGuard™ system that helps reduce the risk of fire, smoke, and explosions caused by lithium batteries
Features
- Engineered with a pressure relief vent system and a double wall with air gap to help maintain a safe-to-touch temperature outer shell with colour-changing tabs, and a filtration system to filter and absorb toxins emitted from Lithium-ion battery fires.
- Double-wall Cabinet Construction-Welded double-wall steel provides an solid structure that keeps potential explosions contained
- Pressure Relief Vent System-Vented door panels dampen the explosive force from thermal runaway and battery failure.
- Reinforced Steel Door Latch Plates-Steel latch rods made with reinforced latch cradle plates ensure the cabinet doors remain closed.
- Door Hinge Flame Guards-Tight sealing door hinge with flame guard prevents fires escaping through the door hinges, preventing secondary fires outside the cabinet.
- Spring Loaded Dampers-Automatic Damper flaps close when the cabinet temperature reaches 135°F to reduce the release of harmful smoke and gases by as much as 99%
- Heat Activated Expanding Door Seals-Intumescent seals swell as temperatures rise to prevent smoke, fumes, and flames from escaping from the door frame.
Specification
- Edges: Fully Welded
- Flame Arrestor Material: Stainless Steel
- High Hazard Seismic Zone: No
- Material: Steel
- Operating Voltage: 110 - 220
- Process: Welding
- Voltage Maximum: 110 - 220
- Voltage Recommended: 110 - 220
Free delivery on all online orders over £54.99, delivered to the UK mainland only; A small order charge of £6.95+ vat is charged on all orders under £54.99 (net).
Some products are subject to an additional shipping surcharge due to their size and weight, contact us for details. Many of our items are available for next day delivery, where items are made to order or not currently in stock delivery times will vary.
Please contact us for a confirmed delivery date or alternatively a representative will confirm your order. Special delivery services are available; please contact our Sales Office to discuss your specific requirements.
The following postcodes will be subject to a delivery surcharge: AB31 to AB56, FK17-FK21, IV1-IV56 & IV63, JE1-JE5, KW1-KW17, PA21-PA40, PH4-PH41, PH49, PH50, HS, KA27, KA28, PA20, PA41-PA78, PH42-PH44 and ZE, This also includes Northern Ireland. Certain products within our range are subject to a delivery surcharge when delivered to additional areas in Scotland than those already listed.
We offer bulk discounts on all our products.
If you would like to find out more about bulk order discounts from Hall-Fast Industrial Supplies Ltd please contact us on 01623 645 645 or email sales@hall-fast.com.
Estimated delivery is for guidance only, an exact delivery date will be confirmed on your order acknowledgement. Please contact us for further information.We make every effort to ensure that the information provided on this page is accurate, we can not be held responsible for any errors, typography or otherwise. Illustrations and images are representational of typical styles and designs may vary. Prices and specifications may alter without prior notice.
