Call 01623 645 645  |  Fax 01623 510 287  |  Email  |  Send an enquiry

Stanley Stick Nails Galvanised PL Series F21, N79


  • Packs of 2000 Round head nails.
  • These plastic collated stick nails traditionally have a full round head, while only giving marginally better holding power to clipped head nails, they are preferred by the construction industry.
  • Collation is angled at 21 deg to accommodate the overlapping heads.
  • Smooth shank nails have exactly that: a smooth appearance.
  • Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail.
  • However, their holding power is the lower than ring shank nails.
  • They require less energy to drive them and the air consumption per nail can be lower.
  • Sometimes it is possible to use a smaller tool to drive them.
  • Ring shank nails have a series of rings punched into the surface of the shank.
  • Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail.
  • Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail.
  • The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater.
  • Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment.
  • Used in applications where no protection is required, for example a one way disposal pallet.
  • As all standard nails come with this finish.
  • Galvanising , or coating with Zinc, is the best way to prevent nails from corroding.
  • The zinc does not protect the steel of the nail, but is corroded first.
  • The thicker the zinc coating, the longer it will be before the nail is attacked.
  • The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc.
  • Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick).
  • The thicker the micron coating the better the protection level of the nails.

View related products

Be the first to review this product. Review Product

Delivery Information

Free delivery on all online orders over £54.99, delivered to the UK mainland only; A small order charge of £6.95 vat is charged on all orders under £54.99 (net). 

Many of our items are available for next day delivery, where items are made to order or not currently in stock delivery times will vary. Please contact us for a confirmed delivery date or alternatively a representative will confirm your order. 

Special delivery services are available; please contact our Sales Office to discuss your specific requirements. 

The following postcodes will be subject to a delivery surcharge: 

AB37 & AB38, AB41-AB56, FK19-FK21, IV1-IV40, IV52-IV54, IV63, JE1-JE5, KW1-KW14, PA21-PA40, PH15-PH41, PH49, PH50, HS, IV41-IV51, IV55 & IV56, KA27, KA28, PA20, PA41-PA78, PH42-PH44 and ZE, This also includes Northern Ireland. Certain products within our range are subject to a delivery surcharge when delivered to additional areas in Scotland than those already listed.

A customer service representive, will contact you upon receipt of your order to advise of the relevant charges or please call us to confirm the surcharge prior to placing your order

If you would prefer to collect your delivery from our warehouse, please select collection at the checkout and we will let you know when your order is ready to collect.

Contact Us for Bulk Discounts

Part Number Description Price
ID 142931
Stanley 2.5 x 45mm 21° Stick Nails Ring Shank Galvanised (2000)

£28.29 (Ex VAT)

£33.95 (Inc VAT)

ID 142932
Stanley 2.5 x 50mm 21° Stick Nails Ring Shank Galvanised (2000)

£30.08 (Ex VAT)

£36.10 (Inc VAT)

ID 142933
Stanley 2.5 x 55mm 21° Stick Nails Ring Shank Galvanised (2000)

£31.80 (Ex VAT)

£38.16 (Inc VAT)

ID 142935
Stanley 2.8 x 50mm 21° Stick Nails Ring Shank Nail 21° Galvanised (2000)

£35.71 (Ex VAT)

£42.85 (Inc VAT)

ID 142936
Stanley 2.8 x 65mm 21° Stick Nails Ring Shank Nail 21° Galvanised (2000)

£37.15 (Ex VAT)

£44.58 (Inc VAT)

ID 142937
Stanley 2.8 x 75mm 21° Stick Nails Ring Shank Nail 21° Galvanised (2000

£40.79 (Ex VAT)

£48.95 (Inc VAT)

ID 142938
Stanley 3.1 x 90mm 21° Stick Nails Smooth Shank Galvanised (2000)

£65.23 (Ex VAT)

£78.28 (Inc VAT)

ID 142939
Stanley 3.1 x 80mm 21° Stick Nails Ring Shank Nail 21° Galvanised (2000)

£66.25 (Ex VAT)

£79.50 (Inc VAT)

ID 142940
Stanley 3.1 x 90mm 21° Stick Nails Ring Shank Nail 21° Galvanised (2000)

£65.23 (Ex VAT)

£78.28 (Inc VAT)

Estimated delivery is for guidance only, an exact delivery date will be confirmed on your order acknowledgement. Please contact us for further information.We make every effort to ensure that the information provided on this page is accurate, we can not be held responsible for any errors, typography or otherwise. Illustrations and images are representational of typical styles and designs may vary. Prices and specifications may alter without prior notice.

  • FREE Delivery!

    free delivery

    FREE delivery available!*

  • Expert Support

    expert support

    We know the products that you need!

  • 24hr Reliability

    24hr reliability

    We go the extra mile to be there

  • Solutions!!!


    We find you the product for the job!

*Online orders over £39.99 (net) delivered to UK Mainland only. Excluding certain postcodes

Stay up to date with Hall-Fast offers, products and news!