Call 01623 645 645  |  Fax 01623 510 287  |  Email sales@hall-fast.com  |  Send an enquiry

Stanley 28 Degree Stick Nail (2000)

Description:

  • Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistence to damp environments.
  • 28 deg Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy.
  • Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter.
  • A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails.
  • This is important when you are working up a ladder with your arm stretched out.
  • (Remember only tools fitted with sequential trip should be used when working up a ladder).
  • Smooth shank nails have exactly that: a smooth appearance.
  • Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails.
  • They require less energy to drive them and the air consumption per nail can be lower.
  • Sometimes it is possible to use a smaller tool to drive them.
  • Ring shank nails have a series of rings punched into the surface of the shank.
  • Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail.
  • Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail.
  • The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater.
  • Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment.
  • Used in applications where no protection is required, for example a one way disposal pallet.
  • As all standard nails come with this finish.
  • Galvanising, or coating with Zinc, is the best way to prevent nails from corroding.
  • The zinc does not protect the steel of the nail, but is corroded first.
  • The thicker the zinc coating, the longer it will be before the nail is attacked.
  • The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc.
  • Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick).
  • The thicker the micron coating the better the protection level of the nails.

View related products

Be the first to review this product. Review Product

Delivery Information

Free delivery on all online orders over £54.99, delivered to the UK mainland only; A small order charge of £6.95 vat is charged on all orders under £54.99 (net). 

Many of our items are available for next day delivery, where items are made to order or not currently in stock delivery times will vary. Please contact us for a confirmed delivery date or alternatively a representative will confirm your order. 

Special delivery services are available; please contact our Sales Office to discuss your specific requirements. 

The following postcodes will be subject to a delivery surcharge: 

AB37 & AB38, AB41-AB56, FK19-FK21, IV1-IV40, IV52-IV54, IV63, JE1-JE5, KW1-KW14, PA21-PA40, PH15-PH41, PH49, PH50, HS, IV41-IV51, IV55 & IV56, KA27, KA28, PA20, PA41-PA78, PH42-PH44 and ZE, This also includes Northern Ireland. Certain products within our range are subject to a delivery surcharge when delivered to additional areas in Scotland than those already listed.

A customer service representive, will contact you upon receipt of your order to advise of the relevant charges or please call us to confirm the surcharge prior to placing your order

If you would prefer to collect your delivery from our warehouse, please select collection at the checkout and we will let you know when your order is ready to collect.

Contact Us for Bulk Discounts

Part Number Description Price
BOSS28050
ID 142832
Stanley 2.8 x 50mm 28° Stick Nail Smooth Shank Bright (2000)

£13.53 (Ex VAT)

£16.24 (Inc VAT)



BOSS28065
ID 142833
Stanley 2.8 x 65mm 28° Stick Nail Smooth Shank Bright (2000)

£15.68 (Ex VAT)

£18.82 (Inc VAT)



BOSS28075
ID 142834
Stanley 2.8 x 75mm 28° Stick Nail Smooth Shank Bright (2000)

£17.34 (Ex VAT)

£20.81 (Inc VAT)



BOSS31090
ID 142835
Stanley 3.1 x 90mm 28° Stick Nail Smooth Shank Bright (2000)

£20.74 (Ex VAT)

£24.89 (Inc VAT)



BOSS280R50
ID 142836
Stanley 2.8 x 50mm 28° Stick Nail Ring Shank Bright (2000)

£14.69 (Ex VAT)

£17.63 (Inc VAT)



BOSS280R65
ID 142837
Stanley 2.8 x 65mm 28° Stick Nail Ring Shank Bright (2000)

£16.64 (Ex VAT)

£19.97 (Inc VAT)



BOSS280R75
ID 142838
Stanley 2.8 x 75mm 28° Stick Nail Ring Shank Bright (2000)

£15.70 (Ex VAT)

£18.84 (Inc VAT)



BOSS310R90
ID 142839
Stanley 3.1 x 90mm 28° Stick Nail Ring Shank Bright (2000)

£22.53 (Ex VAT)

£27.04 (Inc VAT)



BOSS280R50G8
ID 142840
Stanley 2.8 x 50mm 28° Stick Nail Ring Shank Galvanised (2000)

£27.93 (Ex VAT)

£33.52 (Inc VAT)



BOSS28050G8
ID 142841
Stanley 2.8 x 50mm 28° Stick Nail Smooth Shank Galvanised (2000)

£24.39 (Ex VAT)

£29.27 (Inc VAT)



BOSS28065G8
ID 142842
Stanley 2.8 x 65mm 28° Stick Nail Smooth Shank Galvanised (2000)

£29.38 (Ex VAT)

£35.26 (Inc VAT)



BOSS31090G8
ID 142843
Stanley 3.1 x 90mm 28° Stick Nail Smooth Shank Galvanised (2000)

£40.81 (Ex VAT)

£48.97 (Inc VAT)



BOSS280R65G8
ID 142844
Stanley 2.8 x 65mm 28° Stick Nail Ring Shank Galvanised (2000)

£30.33 (Ex VAT)

£36.40 (Inc VAT)



BOSS280R75G8
ID 142845
Stanley 2.8 x 75mm 28° Stick Nail Ring Shank Galvanised (2000)

£31.46 (Ex VAT)

£37.75 (Inc VAT)



BOSS310R90G8
ID 142846
Stanley 3.1 x 90mm 28° Stick Nail Ring Shank Galvanised (2000)

£41.91 (Ex VAT)

£50.29 (Inc VAT)



Estimated delivery is for guidance only, an exact delivery date will be confirmed on your order acknowledgement. Please contact us for further information.We make every effort to ensure that the information provided on this page is accurate, we can not be held responsible for any errors, typography or otherwise. Illustrations and images are representational of typical styles and designs may vary. Prices and specifications may alter without prior notice.

  • FREE Delivery!

    free delivery

    FREE delivery available!*

  • Expert Support

    expert support

    We know the products that you need!

  • 24hr Reliability

    24hr reliability

    We go the extra mile to be there

  • Solutions!!!

    solutions

    We find you the product for the job!

*Online orders over £39.99 (net) delivered to UK Mainland only. Excluding certain postcodes

Stay up to date with Hall-Fast offers, products and news!