Call 01623 645 645  |  Fax 01623 510 287  |  Email  |  Send an enquiry

Forge Tubular Mortice Latches


  • The Forge Tubular Mortice Latch for internal doors can be used with any lever latch handle, lever on rose handle or door knob.
  • Supplied with screws and fitting instructions.

Fitting Instructions:

  • Mark a height line on door face and edge as well as a centre line on door edge.
  • Drill a Ø23mm hole into door edge to accept the latch body, and a Ø19mm hole in door face for the spindle bar measuring from the door edge (43mm for 65mm latch, 60mm for 80mm latch).
  • Fit latch and use a pencil to mark around the faceplate.
  • Chisel out so the faceplate lies flush with door edge.
  • Transfer the height line onto the door frame and mark a vertical line at half the door thickness from the door stop.
  • Drill a Ø16mm hole, 10mm deep at this point and square out with a chisel.
  • Position the striking plate over this hole, mark around with a pencil and chisel out to lie flush.

View related products

Be the first to review this product. Review Product

Delivery Information

Free delivery on all online orders over £39.99, delivered to the UK mainland only; A small order charge of £6.50 vat is charged on all orders under £39.99 (net). 

Many of our items are available for next day delivery, where items are made to order or not currently in stock delivery times will vary. Please contact us for a confirmed delivery date or alternatively a representative will confirm your order. 

Special delivery services are available; please contact our Sales Office to discuss your specific requirements. 

The following postcodes will be subject to a delivery surcharge: 

AB37 & AB38, AB41-AB56, FK19-FK21, IV1-IV40, IV52-IV54, IV63, JE1-JE5, KW1-KW14, PA21-PA40, PH15-PH41, PH49, PH50, HS, IV41-IV51, IV55 & IV56, KA27, KA28, PA20, PA41-PA78, PH42-PH44 and ZE, This also includes Northern Ireland. Certain products within our range are subject to a delivery surcharge when delivered to additional areas in Scotland than those already listed.

A customer service representive, will contact you upon receipt of your order to advise of the relevant charges or please call us to confirm the surcharge prior to placing your order

If you would prefer to collect your delivery from our warehouse, please select collection at the checkout and we will let you know when your order is ready to collect.

Contact Us for Bulk Discounts

Part Number Description - Case Size / Backset Size Price
ID 171596
Tubular Mortice Latch Brass Finish - 65mm (2.5in) / 44.5mm

(£1.39) RRP (Ex VAT)

£1.00 (Ex VAT)

£1.20 (Inc VAT)

ID 171597
Tubular Mortice Latch Nickel Finish - 65mm (2.5in) / 44.5mm

(£1.39) RRP (Ex VAT)

£1.00 (Ex VAT)

£1.20 (Inc VAT)

ID 171598
Tubular Mortice Latch Brass Finish - 76mm (3in) / 57mm

(£1.39) RRP (Ex VAT)

£1.00 (Ex VAT)

£1.20 (Inc VAT)

ID 171599
Tubular Mortice Latch Nickel Finish - 76mm (3in) / 57mm

(£1.39) RRP (Ex VAT)

£1.00 (Ex VAT)

£1.20 (Inc VAT)

Estimated delivery is for guidance only, an exact delivery date will be confirmed on your order acknowledgement. Please contact us for further information.We make every effort to ensure that the information provided on this page is accurate, we can not be held responsible for any errors, typography or otherwise. Illustrations and images are representational of typical styles and designs may vary. Prices and specifications may alter without prior notice.

  • FREE Delivery!

    free delivery

    FREE delivery available!*

  • Expert Support

    expert support

    We know the products that you need!

  • 24hr Reliability

    24hr reliability

    We go the extra mile to be there

  • Solutions!!!


    We find you the product for the job!

*Online orders over £39.99 (net) delivered to UK Mainland only. Excluding certain postcodes

Stay up to date with Hall-Fast offers, products and news!